Your Vehicle: 1996 Acura RL Click here to choose a new vehicle
This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

Rack And Pinion Assembly - Cardone Reman - Rack and Pinion Assembly (Part Number: 26-1771)

  • Price:   $  324.35

  • Availability: In Stock

Fits your vehicle.

  • CTO: MX
  • Emission Code: 1
  • Canadian Harmonizing Tariff Code: 8708949900
  • Harmonized Tariff Code (Schedule B): 8708948000
  • Harmonized Tariff Code (HTS): 8708947550
  • Life Cycle Status Code: 2
  • Life Cycle Status Description: Available to Order
  • SDR Required Flag: N
  • Maximum Cases per Pallet Layer: 4
  • Pallet Layer Maximum: 9
  • Remanufactured Part: Y
  • Warranty Distance: 36000
  • Warranty Distance UOM: MI
  • Warranty Special UOM: TX
  • Warranty Time: 36
  • Warranty Time UOM: MO
  • Bellows Color: Black
  • Casting Material: Steel Aluminum
  • Distance Between Mounting Holes: 4.63 IN
  • Distance Between Mounting Holes: 117.48 MM
  • E-Waste: No
  • FAQs: For the first few minutes of driving my car, the steering is hard. Is the rack and pinion bad or the power steering pump?
  • FAQs: I replaced the rack and now the power steering pump is whining. What happened? It never did this before!
  • FAQs: The rack and pinion does not return to center by itself. The geometry of the front suspension causes the wheels to return to center coming out of a turn. If the vehicle will not return to center, first, check the front end alignment, then, check for a restricted return line in the power steering system. If the return line is restricted or kinked, this could be blocking the flow of fluid back to the pump.
  • FAQs: This symptom is classified as \"morning sickness\". This condition is caused by Teflon sealing rings on the spool valve wearing grooves in the aluminum housing of the rack and pinion resulting in an internal bypass of pressure. Once the housing warms up, the metal will expand and reduce the pressure loss. The rack and pinion must be replaced.
  • FAQs: Steering not returning to center coming out of a turn. What could be causing this?
  • FAQs: The most likely cause of power steering pump whine is air in the system. The Steering system must be bled completely.
  • Gasket or Seal Included: Yes
  • Grade Type: Regular
  • Input Shaft Diameter: 0.69 IN
  • Input Shaft Diameter: 17.42 MM
  • Input Shaft Length: 1.63 IN
  • Input Shaft Length: 41.28 MM
  • Mounting Brackets Included: No
  • Number of Mounting Holes: 2
  • Outer Tie Rods Included: No
  • Package Contents: Rack and Pinion Sealing Kit Instruction Sheet
  • Product Condition: Remanufactured
  • Product Line Marketing Stmt: After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
  • Rack Length: 40.69 IN
  • Rack Length: 1033.47 MM
  • Steering Input Shaft Spline Quantity: 36
  • Steering Rack Color/Finish: Black
  • Tie Rod Ends Included: Yes
  • Total Turns Lock to Lock: 3.38
  • Type: Hydraulic
  • Application Summary: Acura RL 2004-96, TL 1998-96
  • AAIA Part Type Description: Rack and Pinion Assembly
  • Product Description - Invoice: Reman. Rack and Pinion Assembly
  • Key Search Words: Rack and Pinion, Rack and Pinion Complete Unit, Complete Rack, EPS
  • Label Description: Remanufactured Rack and Pinion Assembly
  • Marketing Description: Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE's Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
  • Short Product Description: Rack and Pinion

Product Details

Manufacturer:
Cardone Reman
Part Number:
26-1771
Manufacturer Part Number:
26-1771
Description:
Rack And Pinion Assembly
Long Description:
Rack and Pinion Assembly
Part Type:
Rack And Pinion Assembly
Category:
Steering
Subcategory:
Steering Gear And Related Components
Sales Rank:

Technical Details

Core Price:
  $  73.80
Condition:
Remanufactured
Product Fit:
Direct Fit
Weight:
22 lbs.
Height:
6.5"
Width:
10.25"
Length:
10.25"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1
Item GTIN:
082617440028

Specifications

CTO
MX
Emission Code
1
Canadian Harmonizing Tariff Code
8708949900
Harmonized Tariff Code (Schedule B)
8708948000
Harmonized Tariff Code (HTS)
8708947550
Life Cycle Status Code
2
Life Cycle Status Description
Available to Order
SDR Required Flag
N
Maximum Cases per Pallet Layer
4
Pallet Layer Maximum
9
Remanufactured Part
Y
Warranty Distance
36000
Warranty Distance UOM
MI
Warranty Special UOM
TX
Warranty Time
36
Warranty Time UOM
MO
Bellows Color
Black
Casting Material
Steel Aluminum
Distance Between Mounting Holes
4.63 IN
Distance Between Mounting Holes
117.48 MM
E-Waste
No
FAQs
For the first few minutes of driving my car, the steering is hard. Is the rack and pinion bad or the power steering pump?
FAQs
I replaced the rack and now the power steering pump is whining. What happened? It never did this before!
FAQs
The rack and pinion does not return to center by itself. The geometry of the front suspension causes the wheels to return to center coming out of a turn. If the vehicle will not return to center, first, check the front end alignment, then, check for a restricted return line in the power steering system. If the return line is restricted or kinked, this could be blocking the flow of fluid back to the pump.
FAQs
This symptom is classified as \"morning sickness\". This condition is caused by Teflon sealing rings on the spool valve wearing grooves in the aluminum housing of the rack and pinion resulting in an internal bypass of pressure. Once the housing warms up, the metal will expand and reduce the pressure loss. The rack and pinion must be replaced.
FAQs
Steering not returning to center coming out of a turn. What could be causing this?
FAQs
The most likely cause of power steering pump whine is air in the system. The Steering system must be bled completely.
Gasket or Seal Included
Yes
Grade Type
Regular
Input Shaft Diameter
0.69 IN
Input Shaft Diameter
17.42 MM
Input Shaft Length
1.63 IN
Input Shaft Length
41.28 MM
Mounting Brackets Included
No
Number of Mounting Holes
2
Outer Tie Rods Included
No
Package Contents
Rack and Pinion Sealing Kit Instruction Sheet
Product Condition
Remanufactured
Product Line Marketing Stmt
After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
Rack Length
40.69 IN
Rack Length
1033.47 MM
Steering Input Shaft Spline Quantity
36
Steering Rack Color/Finish
Black
Tie Rod Ends Included
Yes
Total Turns Lock to Lock
3.38
Type
Hydraulic
Application Summary
Acura RL 2004-96, TL 1998-96
AAIA Part Type Description
Rack and Pinion Assembly
Product Description - Invoice
Reman. Rack and Pinion Assembly
Key Search Words
Rack and Pinion, Rack and Pinion Complete Unit, Complete Rack, EPS
Label Description
Remanufactured Rack and Pinion Assembly
Marketing Description
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE's Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Short Product Description
Rack and Pinion

The CARDONE REMAN Rack And Pinion Assembly contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
1996AcuraRL3.5L[Rack And Pinion Assembly] Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 


Can't find what you are looking for? Try searching by one of these methods below.