Your Vehicle:
2013 Lexus RX350 Click here to choose a new vehicle
Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Rack And Pinion Assembly - Cardone Reman - Rack and Pinion Assembly (Part Number: 1G-2702)
- Application Summary: Lexus RX350 2022-10, RX350L 2022-19, RX450h 2022-10, RX450hL 2022-19 Toyota Venza 2015-09
- AAIA Part Type Description: Rack and Pinion Assembly
- Product Description - Invoice: Reman. Rack and Pinion Assembly
- Key Search Words: Rack and Pinion, EPS, Manual Rack and Pinion, EPS Rack and Pinion
- Label Description: Remanufactured Rack and Pinion Assembly
- Marketing Description: Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE's Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
- Short Product Description: Rack and Pinion
- CTO: MX
- Emission Code: 1
- Canadian Harmonizing Tariff Code: 8708949900
- Harmonized Tariff Code (Schedule B): 8708948000
- Harmonized Tariff Code (HTS): 8708947550
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDR Required Flag: N
- Maximum Cases per Pallet Layer: 4
- Pallet Layer Maximum: 9
- Remanufactured Part: Y
- Warranty Distance: 36000
- Warranty Distance UOM: MI
- Warranty Special UOM: TX
- Warranty Time: 36
- Warranty Time UOM: MO
- Bellows Color: BLACK
- Casting Material: ALUMINUM
- Distance Between Mounting Holes: 19.13 IN
- Distance Between Mounting Holes: 485.78 MM
- E-Waste: NO
- Gasket or Seal Included: NO
- Grade Type: Regular
- Input Shaft Diameter: 0.78 IN
- Input Shaft Length: 3.19 IN
- Input Shaft Length: 80.96 MM
- Mounting Brackets Included: NO
- Outer Tie Rods Included: NO
- Package Contents: Rack and Pinion Instruction Sheet
- Product Condition: Remanufactured
- Product Line Marketing Stmt: After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Rack Length: 44.00 IN
- Rack Length: 1117.60 MM
- Steering Input Shaft Spline Quantity: 36
- Tie Rod Ends Included: Yes
- Type: Manual
- Manufacturer:
- Cardone Reman
- Part Number:
- 1G-2702
- Manufacturer Part Number:
- 1G-2702
- Description:
- Rack And Pinion Assembly
- Long Description:
- Rack and Pinion Assembly
- Part Type:
- Rack And Pinion Assembly
- Category:
- Steering
- Subcategory:
- Steering Gear And Related Components
- Sales Rank:
Product Details
- Core Price:
- $ 44.10
- Condition:
- Remanufactured
- Product Fit:
- Direct Fit
- Weight:
- 19 lbs.
- Height:
- 6.5"
- Width:
- 10.25"
- Length:
- 10.25"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 884548285545
Technical Details
- Application Summary
- Lexus RX350 2022-10, RX350L 2022-19, RX450h 2022-10, RX450hL 2022-19 Toyota Venza 2015-09
- AAIA Part Type Description
- Rack and Pinion Assembly
- Product Description - Invoice
- Reman. Rack and Pinion Assembly
- Key Search Words
- Rack and Pinion, EPS, Manual Rack and Pinion, EPS Rack and Pinion
- Label Description
- Remanufactured Rack and Pinion Assembly
- Marketing Description
- Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE's Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
- Short Product Description
- Rack and Pinion
- CTO
- MX
- Emission Code
- 1
- Canadian Harmonizing Tariff Code
- 8708949900
- Harmonized Tariff Code (Schedule B)
- 8708948000
- Harmonized Tariff Code (HTS)
- 8708947550
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- Maximum Cases per Pallet Layer
- 4
- Pallet Layer Maximum
- 9
- Remanufactured Part
- Y
- Warranty Distance
- 36000
- Warranty Distance UOM
- MI
- Warranty Special UOM
- TX
- Warranty Time
- 36
- Warranty Time UOM
- MO
- Bellows Color
- BLACK
- Casting Material
- ALUMINUM
- Distance Between Mounting Holes
- 19.13 IN
- Distance Between Mounting Holes
- 485.78 MM
- E-Waste
- NO
- Gasket or Seal Included
- NO
- Grade Type
- Regular
- Input Shaft Diameter
- 0.78 IN
- Input Shaft Length
- 3.19 IN
- Input Shaft Length
- 80.96 MM
- Mounting Brackets Included
- NO
- Outer Tie Rods Included
- NO
- Package Contents
- Rack and Pinion Instruction Sheet
- Product Condition
- Remanufactured
- Product Line Marketing Stmt
- After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Rack Length
- 44.00 IN
- Rack Length
- 1117.60 MM
- Steering Input Shaft Spline Quantity
- 36
- Tie Rod Ends Included
- Yes
- Type
- Manual
Specifications
The CARDONE REMAN Rack And Pinion Assembly contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2013 | Lexus | RX350 | 3.5L | [Rack And Pinion Assembly] Quantity needed per vehicle: 1 |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|