ACDELCO GOLD/PROFESSIONAL - Ceramic - DCC 17D813CH
ACDELCO GOLD/PROFESSIONAL - Ceramic - DCC 17D813CH
‹ ›

Disc Brake Pad Set - Acdelco Gold/professional - Rear Brake Pad Set (Part Number: 17D813CH)

  • Price:   $  54.33

  • Availability: In Stock

Check The Fit

  • Good Maintenance Practices - Section 2 - Bullet 2: Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • Outer Pad Overall Thickness: 0.201 IN
  • Outer Pad Friction Material Thickness: 14.9 MM
  • Outer Pad Friction Material Thickness: 0.59 IN
  • Inner Pad Overall Thickness: 0.201 IN
  • Outer Pad Width: 3.890 IN
  • Good Maintenance Practices - Section 1 - Bullet 3: Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • Inner Pad Width: 3.890 IN
  • Good Maintenance Practices - Section 2 - Header: The following should be conducted by a qualified technician:
  • Length: 6.88 IN
  • Inner Pad Height: 1.610 IN
  • Good Maintenance Practices - Section 1 - Bullet 4: Check the thickness of your brake pads.
  • Inner Pad Friction Material Thickness: 14.9 MM
  • Inner Pad Friction Material Thickness: 0.59 IN
  • Good Maintenance Practices - Section 1 - Header: The following inspections and maintenance procedures can help prevent potential brake problems:
  • California Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
  • Good Maintenance Practices - Section 2 - Bullet 1: Inspection of the brake hoses for brittleness or cracking.
  • Application Summary: HyundaiKia
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 4: Brake pedal pulsation (not to be confused with normal ABS operation).
  • Weight: 1.5 LB
  • Outer Pad Height: 1.610 IN
  • Good Maintenance Practices - Section 1 - Bullet 2: Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • Height: 2 IN
  • Mounting Hardware Included: Yes
  • Friction Material Composition: Ceramic
  • Good Maintenance Practices - Section 2 - Bullet 3: Inspection of wheel bearings and grease seals.
  • CTO: CN
  • CTP: MX
  • CTQ: IN
  • CTR: US
  • Harmonized Tariff Code (HTS): 8708305040
  • Life Cycle Status Code: 7
  • Life Cycle Status Description: Superseded
  • Warranty Special: 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details.
  • Warranty Special UOM: TX
  • Key Search Words: brake-padbrake-shoerotorsdrumbrake-jobfront-brakerear-brakecyliderhydraluicdot-3dot-4front-brakesrear-brakesbrake-setbreaks
  • AAIA Part Type Description: Disc Brake Pad Set
  • Extended Product Description: Ceramic Rear Disc Brake Pad Set
  • Good Maintenance Practices - Section 1 - Bullet 1: Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
  • Width: 4.62 IN
  • FMSI Number: 7688
  • Good Maintenance Practices - Section 2 - Bullet 4: Parking brake adjustments (as needed).
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 5: Vehicle pulls to the left or right when brakes are applied.

Product Details

Manufacturer:
Acdelco Gold/professional
Part Number:
17D813CH
Manufacturer Part Number:
17D813CH
Description:
Disc Brake Pad Set
Long Description:
Rear Brake Pad Set
Part Type:
Disc Brake Pad Set
Category:
Brake
Subcategory:
Disc Pads And Brake Shoes
Sales Rank:

Technical Details

Weight:
1.5 lbs.
Height:
2"
Width:
4.62"
Length:
4.62"
UOM:
EA
Quantity Sold:
Sold individually
Minimum Order Qty:
1

Specifications

Good Maintenance Practices - Section 2 - Bullet 2
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Outer Pad Overall Thickness
0.201 IN
Outer Pad Friction Material Thickness
14.9 MM
Outer Pad Friction Material Thickness
0.59 IN
Inner Pad Overall Thickness
0.201 IN
Outer Pad Width
3.890 IN
Good Maintenance Practices - Section 1 - Bullet 3
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Inner Pad Width
3.890 IN
Good Maintenance Practices - Section 2 - Header
The following should be conducted by a qualified technician:
Length
6.88 IN
Inner Pad Height
1.610 IN
Good Maintenance Practices - Section 1 - Bullet 4
Check the thickness of your brake pads.
Inner Pad Friction Material Thickness
14.9 MM
Inner Pad Friction Material Thickness
0.59 IN
Good Maintenance Practices - Section 1 - Header
The following inspections and maintenance procedures can help prevent potential brake problems:
California Proposition 65
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Good Maintenance Practices - Section 2 - Bullet 1
Inspection of the brake hoses for brittleness or cracking.
Application Summary
HyundaiKia
Signs of Wear & Troubleshooting - Section 1 - Bullet 4
Brake pedal pulsation (not to be confused with normal ABS operation).
Weight
1.5 LB
Outer Pad Height
1.610 IN
Good Maintenance Practices - Section 1 - Bullet 2
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Height
2 IN
Mounting Hardware Included
Yes
Friction Material Composition
Ceramic
Good Maintenance Practices - Section 2 - Bullet 3
Inspection of wheel bearings and grease seals.
CTO
CN
CTP
MX
CTQ
IN
CTR
US
Harmonized Tariff Code (HTS)
8708305040
Life Cycle Status Code
7
Life Cycle Status Description
Superseded
Warranty Special
24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Warranty Special UOM
TX
Key Search Words
brake-padbrake-shoerotorsdrumbrake-jobfront-brakerear-brakecyliderhydraluicdot-3dot-4front-brakesrear-brakesbrake-setbreaks
AAIA Part Type Description
Disc Brake Pad Set
Extended Product Description
Ceramic Rear Disc Brake Pad Set
Good Maintenance Practices - Section 1 - Bullet 1
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Width
4.62 IN
FMSI Number
7688
Good Maintenance Practices - Section 2 - Bullet 4
Parking brake adjustments (as needed).
Signs of Wear & Troubleshooting - Section 1 - Bullet 5
Vehicle pulls to the left or right when brakes are applied.

The ACDELCO GOLD/PROFESSIONAL Disc Brake Pad Set contains no remanufactured components, and is designed to operate in either city or highway driving.

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 
Can't find what you are looking for? Try searching by one of these methods below.