Product Details

Manufacturer:

Cardone Reman

Part Number:

60-1376

Manufacturer Part Number:

60-1376

Description:

Cv Axle Shaft

Long Description:

CV Axle Assembly

Part Type:

Cv Axle Shaft

Category:

Driveline And Axles

Subcategory:

Cv Components

Sales Rank:

Technical Details

Core Price:

  $  8.10

Condition:

Remanufactured

Product Fit:

Direct Fit

Weight:

12.5 lbs.

Height:

5"

Width:

5"

Length:

5"

UOM:

EA

Quantity Sold:

Sold individually

Qty Per Application:

1

Minimum Order Qty:

1

Item GTIN:

082617777070

Specifications

ABS Ring Included

No

Axle Nut Locking Type

Self Lock

Compressed Length

20.5625 IN

E-Waste

No

FAQs

Always use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly.

FAQs

When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?

FAQs

Are the CV Drive Axle shafts balanced at the factory?

FAQs

Never allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint.

FAQs

The most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint.

FAQs

The old CV Drive Axle has a locking style (prevailing torque) nut. Should I reuse it?

FAQs

When replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking.

FAQs

I hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this?

FAQs

I removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do?

FAQs

NO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one.

FAQs

The transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time.

FAQs

When I replace the CV drive axles, should I reuse the old seals?

FAQs

Is it OK to use an impact hammer to install the retaining nut?

FAQs

Shafts are inspected 100% for run out to prevent vibrations. Only shafts that meet the specifications for run out are utilized in the remanufacturing of a CV Drive Axle assembly.

FAQs

The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.

FAQs

Can I let the CV Drive Axles hang while I am working on the car?

FAQs

I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?

FAQs

Never use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications.

FAQs

The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it?

FAQs

The most likely cause is a broken bearing cage due to excessive torque load. This is typically an outboard joint problem.

FAQs

The wheels wobble when I make a turn. What's the problem?

FAQs

When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?

FAQs

The most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up.

FAQs

When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.

Input Shaft Connection Style

Spline

Output Shaft Connection Style

Spline

Package Contents

Complete Axle, Instruction Sheet

Product Condition

Remanufactured

Product Line Marketing Stmt

After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.

Spindle Nut Included

Yes

Spindle Nut Thread Size

M20X1.5

CTO

MX

Emission Code

1

Canadian Harmonizing Tariff Code

8708508900

Harmonized Tariff Code (Schedule B)

8708508500

Harmonized Tariff Code (HTS)

8708508500

Life Cycle Status Code

2

Life Cycle Status Description

Available to Order

SDR Required Flag

N

Maximum Cases per Pallet Layer

10

Pallet Layer Maximum

9

Remanufactured Part

Y

Warranty Distance

18000

Warranty Distance UOM

MI

Warranty Special UOM

TX

Warranty Time

12

Warranty Time UOM

MO

Application Summary

Chevrolet Cobalt 2010-05, HHR 2011-06 Pontiac G4 2006-05, G5 2010-07, Pursuit 2006-05 Saturn Ion 2007-05

AAIA Part Type Description

CV Axle Assembly

Product Description - Invoice

Reman. CV Axle Assembly

Key Search Words

CV, CV Axle, CV Drive Axle, CV Axle Shaft, Halfshaft, Constant Velocity Axle, Constant Velocity Drive Axle, Axle Shaft

Label Description

Remanufactured CV Axle Assembly

Marketing Description

CARDONE has extensive experience in remanufacturing CV Drive Axles - we've spent over three decades re-engineering materials and processes to arrive at a superior, longer-lasting product. Our proprietary pneumatic clamping machines create a perfect seal between the boot and housing, creating a water-tight seal. The perfect geometry of the ball groove is maintained to allow for proper grease flow, significantly increasing longevity. Additionally, all CV Drive Axle shafts are individually verified for straightness, resulting in vibration-free performance at all speeds.

Short Product Description

CV Axle Assembly

The CARDONE REMAN Cv Axle Shaft contains no remanufactured components, and is designed to operate in either city or highway driving.