This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
DELPHI - Steering Tie Rod End - DPH TA2363
DELPHI - Steering Tie Rod End - DPH TA2363
DELPHI - Steering Tie Rod End - DPH TA2363
DELPHI - Steering Tie Rod End - DPH TA2363
DELPHI - Steering Tie Rod End - DPH TA2363
DELPHI - Steering Tie Rod End - DPH TA2363
DELPHI - Steering Tie Rod End - DPH TA2363
DELPHI - Steering Tie Rod End - DPH TA2363
‹ ›

Steering Tie Rod End - Delphi - Tie Rod End (Part Number: TA2363)

  • Price:   $  30.80

  • Availability: In Stock

Check The Fit

  • Adjustable: No
  • Bearing Material: Plastic
  • California Proposition 65: WARNING: This product can expose you to Antimony oxide (Antimony trioxide) Carbon (Black) and Nickel (Metallic) which are known to the State of California to cause cancer (For more information go to www.p65warnings.ca.gov
  • CTO: TR
  • Emission Code: 1
  • Harmonized Tariff Code (Schedule B): 8708998175
  • Harmonized Tariff Code (HTS): 8708998180
  • Life Cycle Status Code: 4
  • Life Cycle Status Description: Announced
  • SDR Required Flag: N
  • National Popularity Description: Next 15% of Product Group Sales Value
  • NPS: C
  • Maximum Cases per Pallet Layer: 1
  • Pallet Layer Maximum: 1
  • PRC: NEW
  • Taxable: N
  • Warranty Special: Limited Lifetime
  • Warranty Special UOM: LF
  • California Proposition 65: WARNING: This product can expose you to chemicals including Carbon Black which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
  • Color: Black
  • Cone Outside Diameter: 15.3 MM
  • Dust Boot Included: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • End 1 Thread Diameter: 0.394 IN
  • End 1 Thread Diameter: 10.0 MM
  • End 1 Thread Direction: Clockwise (Right)
  • End 2 Gender: Female
  • End 2 Thread Diameter: 14.0 MM
  • End 2 Thread Diameter: 0.551 IN
  • End 2 Thread Direction: Clockwise (Right)
  • End 2 Thread Pitch: 1.5 MM
  • Finish: Coated
  • Grease Fitting Included: No
  • Greaseable: No
  • Height: 68.4 MM
  • Housing Material: Steel
  • Item Grade: Standard Replacement
  • Length - Stud Center to End: 9.173 IN
  • Length - Stud Center to End: 233.0 MM
  • Mounting Hardware Included: Yes
  • Position(s): Right Outer
  • Pre-Greased: Yes
  • Stud Type: Threaded
  • Tie Rod Material: Steel
  • Tube Diameter: 0.866 IN
  • Tube Diameter: 22.0 MM
  • Type: Bent
  • Weight: 1.47 LB
  • Width: 59.0 MM
  • AAIA Part Type Description: Tie Rod End
  • Label Description: Tie Rod End
  • Marketing Description: Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
  • Short Product Description: Tie Rod End

Product Details

Manufacturer:
Delphi
Part Number:
TA2363
Manufacturer Part Number:
TA2363
Description:
Steering Tie Rod End
Long Description:
Tie Rod End
Part Type:
Steering Tie Rod End
Category:
Steering
Subcategory:
Steering Gear And Related Components
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
1.4 lbs.
Height:
2.8"
Width:
3.6"
Length:
3.6"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1
Item GTIN:
689604247761

Specifications

Adjustable
No
Bearing Material
Plastic
California Proposition 65
WARNING: This product can expose you to Antimony oxide (Antimony trioxide) Carbon (Black) and Nickel (Metallic) which are known to the State of California to cause cancer (For more information go to www.p65warnings.ca.gov
CTO
TR
Emission Code
1
Harmonized Tariff Code (Schedule B)
8708998175
Harmonized Tariff Code (HTS)
8708998180
Life Cycle Status Code
4
Life Cycle Status Description
Announced
SDR Required Flag
N
National Popularity Description
Next 15% of Product Group Sales Value
NPS
C
Maximum Cases per Pallet Layer
1
Pallet Layer Maximum
1
PRC
NEW
Taxable
N
Warranty Special
Limited Lifetime
Warranty Special UOM
LF
California Proposition 65
WARNING: This product can expose you to chemicals including Carbon Black which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Color
Black
Cone Outside Diameter
15.3 MM
Dust Boot Included
Yes
Dust Boot Material
Choloroprene Rubber (CR)
End 1 Thread Diameter
0.394 IN
End 1 Thread Diameter
10.0 MM
End 1 Thread Direction
Clockwise (Right)
End 2 Gender
Female
End 2 Thread Diameter
14.0 MM
End 2 Thread Diameter
0.551 IN
End 2 Thread Direction
Clockwise (Right)
End 2 Thread Pitch
1.5 MM
Finish
Coated
Grease Fitting Included
No
Greaseable
No
Height
68.4 MM
Housing Material
Steel
Item Grade
Standard Replacement
Length - Stud Center to End
9.173 IN
Length - Stud Center to End
233.0 MM
Mounting Hardware Included
Yes
Position(s)
Right Outer
Pre-Greased
Yes
Stud Type
Threaded
Tie Rod Material
Steel
Tube Diameter
0.866 IN
Tube Diameter
22.0 MM
Type
Bent
Weight
1.47 LB
Width
59.0 MM
AAIA Part Type Description
Tie Rod End
Label Description
Tie Rod End
Marketing Description
Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
Short Product Description
Tie Rod End

The DELPHI Steering Tie Rod End contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
2008MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2008MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2007MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2007MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2006MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2006MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2006MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2006MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2005MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2005MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2005MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2005MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2004MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2004MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2004MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2004MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2003MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2003MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1
2003MiniCooper1.6L[Steering Tie Rod End] Right Outer; Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 
Can't find what you are looking for? Try searching by one of these methods below.