This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
DELPHI - Suspension Ball Joint - DPH TC435

Suspension Ball Joint - Delphi - Ball Joint (Part Number: TC435)

  • Price:   $  17.74

  • Availability: In Stock

Check The Fit

  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushing Quantity: 0
  • Bushings Included: No
  • California Proposition 65: WARNING: This product can expose you to chemicals including Carbon Black which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
  • California Proposition 65: WARNING: This product can expose you to chemicals including Ethylene Thiorea which are known to the State of California to cause cancer and known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
  • Castle Nut Included: Yes
  • Color: Black
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot Included: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Grease Fitting Included: No
  • Greaseable: No
  • Height: 1.772 IN
  • Item Grade: Standard Replacement
  • Material: Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040
  • Maximum Outside Diameter: 38.2 MM
  • Maximum Outside Diameter: 1.5 IN
  • Mount Plate Included: No
  • Mounting Bolts Included: No
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Nuts Included: Yes
  • Position(s): Front Lower
  • Stud Tapered End 1 Diameter: 14.9 MM
  • Stud Tapered End 1 Diameter: 0.587 IN
  • Stud Tapered End 2 Diameter: 18.9 MM
  • Stud Tapered End 2 Diameter: 0.744 IN
  • Stud Thread Diameter: 14.0 MM
  • Stud Thread Length: 24.0 MM
  • Stud Thread Length: 0.945 IN
  • Stud Thread Pitch: 1.5 MM
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Type: Premium
  • Washers Included: No
  • Width: 45.0 MM
  • AAIA Part Type Description: Ball Joint
  • Label Description: Ball Joint
  • Marketing Description: Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
  • Short Product Description: Ball Joint
  • CTO: TR
  • Emission Code: 1
  • Harmonized Tariff Code (Schedule B): 8708807000
  • Harmonized Tariff Code (HTS): 8708806590
  • Life Cycle Status Code: 4
  • Life Cycle Status Description: Announced
  • SDR Required Flag: N
  • National Popularity Description: Last 5% of Product Group Sales Value
  • NPS: D
  • Maximum Cases per Pallet Layer: 1
  • Pallet Layer Maximum: 1
  • PRC: New
  • Taxable: N
  • Warranty Special: Limited Lifetime
  • Warranty Special UOM: LF

Product Details

Manufacturer:
Delphi
Part Number:
TC435
Manufacturer Part Number:
TC435
Description:
Suspension Ball Joint
Long Description:
Ball Joint
Part Type:
Suspension Ball Joint
Category:
Suspension
Subcategory:
Suspension Springs And Related Components
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
0.6 lbs.
Height:
4.2"
Width:
2.8"
Length:
2.8"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
2
Minimum Order Qty:
1
Item GTIN:
689604272312

Specifications

Adjustable
No
Ball Joint Assembly
Yes
Bushing Quantity
0
Bushings Included
No
California Proposition 65
WARNING: This product can expose you to chemicals including Carbon Black which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
California Proposition 65
WARNING: This product can expose you to chemicals including Ethylene Thiorea which are known to the State of California to cause cancer and known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Castle Nut Included
Yes
Color
Black
Cotter Pin Hole
Yes
Cotter Pin Included
Yes
Dust Boot Included
Yes
Dust Boot Material
Choloroprene Rubber (CR)
Grease Fitting Included
No
Greaseable
No
Height
1.772 IN
Item Grade
Standard Replacement
Material
Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040
Maximum Outside Diameter
38.2 MM
Maximum Outside Diameter
1.5 IN
Mount Plate Included
No
Mounting Bolts Included
No
Mounting Hardware Included
Yes
Mounting Hole Quantity
0
Mounting Type
Press In
Nuts Included
Yes
Position(s)
Front Lower
Stud Tapered End 1 Diameter
14.9 MM
Stud Tapered End 1 Diameter
0.587 IN
Stud Tapered End 2 Diameter
18.9 MM
Stud Tapered End 2 Diameter
0.744 IN
Stud Thread Diameter
14.0 MM
Stud Thread Length
24.0 MM
Stud Thread Length
0.945 IN
Stud Thread Pitch
1.5 MM
Stud Type
Threaded
Suspension Grade Type
Standard
Tapered Stud
Yes
Type
Premium
Washers Included
No
Width
45.0 MM
AAIA Part Type Description
Ball Joint
Label Description
Ball Joint
Marketing Description
Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
Short Product Description
Ball Joint
CTO
TR
Emission Code
1
Harmonized Tariff Code (Schedule B)
8708807000
Harmonized Tariff Code (HTS)
8708806590
Life Cycle Status Code
4
Life Cycle Status Description
Announced
SDR Required Flag
N
National Popularity Description
Last 5% of Product Group Sales Value
NPS
D
Maximum Cases per Pallet Layer
1
Pallet Layer Maximum
1
PRC
New
Taxable
N
Warranty Special
Limited Lifetime
Warranty Special UOM
LF

The DELPHI Suspension Ball Joint contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
1997NissanAltima2.4L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1997NissanAltima2.4L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1996INFINITIG202.0L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1996NissanAltima2.4L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1995INFINITIG202.0L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1995NissanAltima2.4L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1994INFINITIG202.0L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1994NissanAltima2.4L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1993INFINITIG202.0L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1993NissanAltima2.4L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1992INFINITIG202.0L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1991INFINITIG202.0L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1990NissanPulsar NX1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1990NissanSentra1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1989NissanPulsar NX1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1989NissanPulsar NX1.8L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1989NissanSentra1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1988NissanPulsar NX1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1988NissanPulsar NX1.8L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1988NissanSentra1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1987NissanPulsar NX1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1987NissanPulsar NX1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1987NissanSentra1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1987NissanSentra1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1987NissanSentra1.7L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1986NissanSentra1.6L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2
1986NissanSentra1.7L[Suspension Ball Joint] Front Lower; Quantity needed per vehicle: 2

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 
Can't find what you are looking for? Try searching by one of these methods below.