Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Suspension Control Arm And Ball Joint Assembly - Delphi - Control Arm and Ball Joint Assembly (Part Number: TC5540)
- CTO: TR
- Emission Code: 1
- Harmonized Tariff Code (Schedule B): 8708807000
- Harmonized Tariff Code (HTS): 8708806590
- Life Cycle Status Code: 4
- Life Cycle Status Description: Announced
- SDR Required Flag: N
- National Popularity Description: Next 15% of Product Group Sales Value
- NPS: C
- Maximum Cases per Pallet Layer: 1
- Pallet Layer Maximum: 1
- PRC: NEW
- Taxable: N
- Warranty Special: Limited Lifetime
- Warranty Special UOM: LF
- Adjustable: No
- Ball Joint Mounting Type: Press In
- Ball Joint Stud Type: Threaded
- Ball Joint Thread Diameter: 16.0 MM
- Bushing Material: Rubber
- Bushings Included: Yes
- California Proposition 65: WARNING: This product can expose you to chemicals including Ethylene Thiorea which are known to the State of California to cause cancer and known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
- Control Arm Color: Black
- Control Arm Construction: Casting/Forged
- Control Arm Material: Steel
- Control Arm Maximum Length: 493.0 MM
- Control Arm Maximum Length: 19.409 IN
- Control Arm Maximum Width: 411.0 MM
- Control Arm Maximum Width: 16.181 IN
- Grease Fitting Included: No
- Greaseable: No
- Item Grade: Standard Replacement
- Mounting Hardware Included: Yes
- Mounting Hole Diameter: 41.7 MM
- Mounting Hole Quantity: 1
- Position(s): Front Right
- Pre-Greased: Yes
- AAIA Part Type Description: Control Arm and Ball Joint Assembly
- Label Description: Control Arm and Ball Joint Assembly
- Marketing Description: Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
- Short Product Description: Arm/Joint
- Manufacturer:
- Delphi
- Part Number:
- TC5540
- Manufacturer Part Number:
- TC5540
- Description:
- Suspension Control Arm And Ball Joint Assembly
- Long Description:
- Control Arm and Ball Joint Assembly
- Part Type:
- Suspension Control Arm And Ball Joint Assembly
- Category:
- Suspension
- Subcategory:
- Suspension Springs And Related Components
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 17.3 lbs.
- Height:
- 5.8"
- Width:
- 23"
- Length:
- 23"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 689604301173
Technical Details
- CTO
- TR
- Emission Code
- 1
- Harmonized Tariff Code (Schedule B)
- 8708807000
- Harmonized Tariff Code (HTS)
- 8708806590
- Life Cycle Status Code
- 4
- Life Cycle Status Description
- Announced
- SDR Required Flag
- N
- National Popularity Description
- Next 15% of Product Group Sales Value
- NPS
- C
- Maximum Cases per Pallet Layer
- 1
- Pallet Layer Maximum
- 1
- PRC
- NEW
- Taxable
- N
- Warranty Special
- Limited Lifetime
- Warranty Special UOM
- LF
- Adjustable
- No
- Ball Joint Mounting Type
- Press In
- Ball Joint Stud Type
- Threaded
- Ball Joint Thread Diameter
- 16.0 MM
- Bushing Material
- Rubber
- Bushings Included
- Yes
- California Proposition 65
- WARNING: This product can expose you to chemicals including Ethylene Thiorea which are known to the State of California to cause cancer and known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
- Control Arm Color
- Black
- Control Arm Construction
- Casting/Forged
- Control Arm Material
- Steel
- Control Arm Maximum Length
- 493.0 MM
- Control Arm Maximum Length
- 19.409 IN
- Control Arm Maximum Width
- 411.0 MM
- Control Arm Maximum Width
- 16.181 IN
- Grease Fitting Included
- No
- Greaseable
- No
- Item Grade
- Standard Replacement
- Mounting Hardware Included
- Yes
- Mounting Hole Diameter
- 41.7 MM
- Mounting Hole Quantity
- 1
- Position(s)
- Front Right
- Pre-Greased
- Yes
- AAIA Part Type Description
- Control Arm and Ball Joint Assembly
- Label Description
- Control Arm and Ball Joint Assembly
- Marketing Description
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
- Short Product Description
- Arm/Joint
Specifications
The DELPHI Suspension Control Arm And Ball Joint Assembly contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2008 | INFINITI | FX35 | 3.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2008 | INFINITI | FX45 | 4.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2007 | INFINITI | FX35 | 3.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2007 | INFINITI | FX45 | 4.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2006 | INFINITI | FX35 | 3.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2006 | INFINITI | FX45 | 4.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2005 | INFINITI | FX35 | 3.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2005 | INFINITI | FX45 | 4.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2004 | INFINITI | FX35 | 3.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2004 | INFINITI | FX45 | 4.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2003 | INFINITI | FX35 | 3.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
| 2003 | INFINITI | FX45 | 4.5L | [Suspension Control Arm and Ball Joint Assembly] Front Right; Quantity needed per vehicle: 1 |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|