Power Steering Hose Assembly - Crp/rein - Rein OE Quality Power Steering High Pressure Feed and Return Hose Assembly (Part Number: PSH0489)

  • Price:   $  105.55

  • Availability: In Stock

Check The Fit

  • AAIA Part Type Description: Power Steering Pressure Line Hose Assembly
  • Extended Product Description: Rein OE Quality Power Steering High Pressure Feed and Return Hose Assembly, Exceeds SAE J188 / J526 Standards
  • Product Description - Invoice: P/S Press. Feed
  • Marketing Description: Rein OE Quality power steering high pressure feed and return hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.
  • Short Product Description: P/S Press. Hose Assy
  • CTO: CN
  • Harmonized Tariff Code (Schedule B): 4009320050
  • Life Cycle Status Code: 2
  • SDR Required Flag: N
  • Warranty Distance: 24000
  • Warranty Distance UOM: DH
  • Warranty Time: 24
  • Warranty Time UOM: MO
  • Application Type: Application Specific
  • Banjo Bolt Included: No
  • Clamps Included: Yes
  • Crush Washers Included: Yes
  • Fitting Seals Included: Yes
  • Functional Name: Transports P/S fluid from P/S Pump
  • Heat Shield Included: Not Required
  • High Pressure End 1 Type: Banjo
  • High Pressure End 2 Gender: Male
  • High Pressure End 2 Thread Diameter MM: 14.0000
  • High Pressure End 2 Type: Inverted Flare
  • High Pressure Hose Burst Pressure PSI: 8700
  • High Pressure Hose Operating Pressure PSI: 1700
  • Hose Crimp End Finish: Zinc Alloy
  • Hose Crimp End Material: Carbon Steel
  • Hose Line Lining: SteelRubber
  • Hose Line Outer Material: SteelRubber
  • Item Grade: StandardReplacement
  • Link to Manufacturer Page: www.reinautomotive.com
  • Low Pressure End 1 Gender: Male
  • Low Pressure End 1 Thread Diameter MM: 17.0000
  • Low Pressure End 1 Type: Inverted Flare
  • Low Pressure End 2 Inside Diameter MM: 9.5000
  • Low Pressure End 2 Outside Diameter MM: 17.0000
  • Low Pressure End 2 Type: Hose
  • Low Pressure Hose Burst Pressure PSI: 1000.0000
  • Low Pressure Hose Material: NBR/CR
  • Low Pressure Hose Operating Pressure PSI: 250.0000
  • Mounting Brackets Included: Yes
  • OE Tier: 2
  • Package Contents: One P/S Hose, Two Washers, One Adjustable Clamps
  • Power Steering Fitting Included: Yes
  • Pressure Switch Port Included: Not Required
  • Protective Shield Inc: Yes
  • Protective Sleeve Included: No
  • Tubing Finish: Zinc Alloy
  • Tubing Material: Carbon Steel

Product Details

Manufacturer:
Crp/rein
Part Number:
PSH0489
Manufacturer Part Number:
PSH0489
Description:
Power Steering Hose Assembly
Long Description:
Rein OE Quality Power Steering High Pressure Feed and Return Hose Assembly
Part Type:
Power Steering Hose Assembly
Category:
Steering
Subcategory:
Power Steering Hoses Pumps And Related Components
Sales Rank:

Technical Details

Weight:
2.88 lbs.
Height:
6.25"
Width:
24"
Length:
24"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1
Item GTIN:
888544078521

Specifications

AAIA Part Type Description
Power Steering Pressure Line Hose Assembly
Extended Product Description
Rein OE Quality Power Steering High Pressure Feed and Return Hose Assembly, Exceeds SAE J188 / J526 Standards
Product Description - Invoice
P/S Press. Feed
Marketing Description
Rein OE Quality power steering high pressure feed and return hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.
Short Product Description
P/S Press. Hose Assy
CTO
CN
Harmonized Tariff Code (Schedule B)
4009320050
Life Cycle Status Code
2
SDR Required Flag
N
Warranty Distance
24000
Warranty Distance UOM
DH
Warranty Time
24
Warranty Time UOM
MO
Application Type
Application Specific
Banjo Bolt Included
No
Clamps Included
Yes
Crush Washers Included
Yes
Fitting Seals Included
Yes
Functional Name
Transports P/S fluid from P/S Pump
Heat Shield Included
Not Required
High Pressure End 1 Type
Banjo
High Pressure End 2 Gender
Male
High Pressure End 2 Thread Diameter MM
14.0000
High Pressure End 2 Type
Inverted Flare
High Pressure Hose Burst Pressure PSI
8700
High Pressure Hose Operating Pressure PSI
1700
Hose Crimp End Finish
Zinc Alloy
Hose Crimp End Material
Carbon Steel
Hose Line Lining
SteelRubber
Hose Line Outer Material
SteelRubber
Item Grade
StandardReplacement
Link to Manufacturer Page
www.reinautomotive.com
Low Pressure End 1 Gender
Male
Low Pressure End 1 Thread Diameter MM
17.0000
Low Pressure End 1 Type
Inverted Flare
Low Pressure End 2 Inside Diameter MM
9.5000
Low Pressure End 2 Outside Diameter MM
17.0000
Low Pressure End 2 Type
Hose
Low Pressure Hose Burst Pressure PSI
1000.0000
Low Pressure Hose Material
NBR/CR
Low Pressure Hose Operating Pressure PSI
250.0000
Mounting Brackets Included
Yes
OE Tier
2
Package Contents
One P/S Hose, Two Washers, One Adjustable Clamps
Power Steering Fitting Included
Yes
Pressure Switch Port Included
Not Required
Protective Shield Inc
Yes
Protective Sleeve Included
No
Tubing Finish
Zinc Alloy
Tubing Material
Carbon Steel

The CRP/REIN Power Steering Hose Assembly contains no remanufactured components, and is designed to operate in either city or highway driving.

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 


Can't find what you are looking for? Try searching by one of these methods below.