Your Vehicle: 1996 Chevrolet C2500 Click here to choose a new vehicle
This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
ACDELCO GM ORIGINAL EQUIPMENT - Automatic Transmission Output Shaft Thrust Washer - DCB 8625401

Automatic Transmission Output Shaft Thrust Washer - Acdelco Gm Original Equipment - Multi-Purpose Thrust Washer (Part Number: 8625401)

  • Price:   $  34.95

  • Availability: In Stock

Fits your vehicle.

  • CTO: US
  • Harmonized Tariff Code (HTS): 7318220000
  • Life Cycle Status Code: 4
  • Life Cycle Status Description: Announced
  • Warranty Special: 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details
  • Warranty Special UOM: TX
  • Finish: #2 Bright
  • Inside Diameter: 2.28 IN
  • Inside Diameter: 57.91 mm
  • Material: Steel
  • Outside Diameter: 3.27 IN
  • Outside Diameter: 83.06 mm
  • Programming Required: No
  • Thickness: 0.074 IN
  • Type: Output Shaft Thrust Washer
  • Application Summary: ChevroletChevroletGMCGMC
  • AAIA Part Type Description: Automatic Transmission Output Shaft Thrust Washer
  • Extended Product Description: Multi-Purpose Thrust Washer
  • Key Search Words: tranny-output-shaft-thrust-washerauto-tranny-output-thrust-washerauto-transmission-output-thrust-washerautomatic-tranny-output-thrust-washerauto-tranney-output-thrust-washeroutput-thrust-washer

Product Details

Manufacturer:
Acdelco Gm Original Equipment
Part Number:
8625401
Manufacturer Part Number:
8625401
Description:
Automatic Transmission Output Shaft Thrust Washer
Long Description:
Multi-Purpose Thrust Washer
Part Type:
Automatic Transmission Output Shaft Thrust Washer
Category:
Transmission
Subcategory:
Hardware Fasteners And Fittings
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
0.01 lbs.
Height:
0.2"
Width:
4.1"
Length:
4.1"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1

Specifications

CTO
US
Harmonized Tariff Code (HTS)
7318220000
Life Cycle Status Code
4
Life Cycle Status Description
Announced
Warranty Special
24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details
Warranty Special UOM
TX
Finish
#2 Bright
Inside Diameter
2.28 IN
Inside Diameter
57.91 mm
Material
Steel
Outside Diameter
3.27 IN
Outside Diameter
83.06 mm
Programming Required
No
Thickness
0.074 IN
Type
Output Shaft Thrust Washer
Application Summary
ChevroletChevroletGMCGMC
AAIA Part Type Description
Automatic Transmission Output Shaft Thrust Washer
Extended Product Description
Multi-Purpose Thrust Washer
Key Search Words
tranny-output-shaft-thrust-washerauto-tranny-output-thrust-washerauto-transmission-output-thrust-washerautomatic-tranny-output-thrust-washerauto-tranney-output-thrust-washeroutput-thrust-washer

The ACDELCO GM ORIGINAL EQUIPMENT Automatic Transmission Output Shaft Thrust Washer contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
1996ChevroletC25005.0LAuto Trans, 4L80-E, 4 Speed Trans, Transmission; Quantity needed per vehicle: 1
1996ChevroletC25005.7LAuto Trans, 4L80-E, 4 Speed Trans, Transmission; Quantity needed per vehicle: 1
1996ChevroletC25005.7LAuto Trans, 4L80-E, 4 Speed Trans, Transmission; Quantity needed per vehicle: 1
1996ChevroletC25006.5LAuto Trans, 4L80-E, 4 Speed Trans, Transmission; Quantity needed per vehicle: 1
1996ChevroletC25006.5LAuto Trans, 4L80-E, 4 Speed Trans, Transmission; Quantity needed per vehicle: 1
1996ChevroletC25007.4LAuto Trans, 4L80-E, 4 Speed Trans, Transmission; Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 


Can't find what you are looking for? Try searching by one of these methods below.