Your Vehicle:
1975 Dodge DART Click here to choose a new vehicle
Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Suspension Stabilizer Bar Link - Delphi - Suspension Stabilizer Bar Link (Part Number: TC5102)
- AAIA Part Type Description: Suspension Stabilizer Bar Link
- Label Description: Suspension Stabilizer Bar Link
- Marketing Description: Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
- Short Product Description: Stab Bar Lnk
- Bolt Length: 4.88 IN
- Bolt Length: 124.0 MM
- Bolt Thread Size: 5/16-24UNF-2A
- Bolts Included: Yes
- Bushing Color: Black
- Bushing Inside Diameter: 0.39 IN
- Bushing Inside Diameter: 10.0 MM
- Bushing Material: Rubber
- Bushing Outside Diameter: 0.98 IN
- Bushing Outside Diameter: 25.0 MM
- Bushings Included: Yes
- California Proposition 65: WARNING: This product can expose you to Antimony oxide (Antimony trioxide) Carbon (Black) and Nickel (Metallic) which are known to the State of California to cause cancer (For more information go to www.p65warnings.ca.gov
- Dust Boot Included: No
- Grade Type: Regular
- Greaseable: No
- Height: 1.38 IN
- Height: 35.0 MM
- Item Grade: Standard Replacement
- Length: 135.0 MM
- Length: 5.31 IN
- Locking Nuts Included: No
- Material: Steel
- Position(s): Front
- Sleeve Length: 1.02 IN
- Sleeve Length: 26.0 MM
- Washers Included: Yes
- Weight: 0.07 LB
- Width: 1.38 IN
- Width: 35.0 MM
- CTO: CN
- Emission Code: 1
- Harmonized Tariff Code (Schedule B): 8708807000
- Harmonized Tariff Code (HTS): 8708806590
- Life Cycle Status Code: 4
- Life Cycle Status Description: Announced
- SDR Required Flag: N
- National Popularity Description: Top 60% of Product Group Sales Value (Units x $, Hits, etc.)
- NPS: A
- Maximum Cases per Pallet Layer: 1
- Pallet Layer Maximum: 1
- PRC: NEW
- Taxable: N
- Warranty Special: Limited Lifetime
- Warranty Special UOM: LF
- Manufacturer:
- Delphi
- Part Number:
- TC5102
- Manufacturer Part Number:
- TC5102
- Description:
- Suspension Stabilizer Bar Link
- Long Description:
- Suspension Stabilizer Bar Link
- Part Type:
- Suspension Stabilizer Bar Link
- Category:
- Suspension
- Subcategory:
- Suspension Springs And Related Components
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.45 lbs.
- Height:
- 5.6"
- Width:
- 2.5"
- Length:
- 2.5"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 2
- Minimum Order Qty:
- 1
- Item GTIN:
- 689604302705
- Position:
- Front
Technical Details
- AAIA Part Type Description
- Suspension Stabilizer Bar Link
- Label Description
- Suspension Stabilizer Bar Link
- Marketing Description
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
- Short Product Description
- Stab Bar Lnk
- Bolt Length
- 4.88 IN
- Bolt Length
- 124.0 MM
- Bolt Thread Size
- 5/16-24UNF-2A
- Bolts Included
- Yes
- Bushing Color
- Black
- Bushing Inside Diameter
- 0.39 IN
- Bushing Inside Diameter
- 10.0 MM
- Bushing Material
- Rubber
- Bushing Outside Diameter
- 0.98 IN
- Bushing Outside Diameter
- 25.0 MM
- Bushings Included
- Yes
- California Proposition 65
- WARNING: This product can expose you to Antimony oxide (Antimony trioxide) Carbon (Black) and Nickel (Metallic) which are known to the State of California to cause cancer (For more information go to www.p65warnings.ca.gov
- Dust Boot Included
- No
- Grade Type
- Regular
- Greaseable
- No
- Height
- 1.38 IN
- Height
- 35.0 MM
- Item Grade
- Standard Replacement
- Length
- 135.0 MM
- Length
- 5.31 IN
- Locking Nuts Included
- No
- Material
- Steel
- Position(s)
- Front
- Sleeve Length
- 1.02 IN
- Sleeve Length
- 26.0 MM
- Washers Included
- Yes
- Weight
- 0.07 LB
- Width
- 1.38 IN
- Width
- 35.0 MM
- CTO
- CN
- Emission Code
- 1
- Harmonized Tariff Code (Schedule B)
- 8708807000
- Harmonized Tariff Code (HTS)
- 8708806590
- Life Cycle Status Code
- 4
- Life Cycle Status Description
- Announced
- SDR Required Flag
- N
- National Popularity Description
- Top 60% of Product Group Sales Value (Units x $, Hits, etc.)
- NPS
- A
- Maximum Cases per Pallet Layer
- 1
- Pallet Layer Maximum
- 1
- PRC
- NEW
- Taxable
- N
- Warranty Special
- Limited Lifetime
- Warranty Special UOM
- LF
Specifications
The DELPHI Suspension Stabilizer Bar Link contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1975 | Dodge | Dart | 3.7L | [Suspension Stabilizer Bar Link] Front; Quantity needed per vehicle: 2 |
| 1975 | Dodge | Dart | 5.2L | [Suspension Stabilizer Bar Link] Front; Quantity needed per vehicle: 2 |
| 1975 | Dodge | Dart | 5.9L | [Suspension Stabilizer Bar Link] Front; Quantity needed per vehicle: 2 |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|