Your Vehicle: 1998 Dodge RAM 3500 Click here to choose a new vehicle

This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

NATIONAL SEAL/BEARING - Transfer Case Input Shaft Pilot Bearing - BCA B-2110

Transfer Case Input Shaft Pilot Bearing - National Seal/bearing - Multi-Purpose Bearing (Part Number: B-2110)

Manufacturer:: National Seal/bearing
Part Number:: B-2110
Manufacturer Part Number:: B-2110
Description:: Transfer Case Input Shaft Pilot Bearing
Long Description:: Multi-Purpose Bearing
Part Type:: Transfer Case Input Shaft Pilot Bearing
Category:: Transfer Case
Subcategory:: Bearings
Sales Rank:

Condition:: New
Product Fit:: Direct Fit
Weight:: 0.11 lbs.
Height:: 2.062"
Width:: 0.875"
Length:: 0.875"
UOM:: EA
Quantity Sold:: Sold individually
Qty Per Application:: 1
Minimum Order Qty:: 1
Item GTIN:: 724956001569

Application Summary: 2007-2009 Chrysler Aspen (Front) 2004 Dodge Ram 1500 1975-1989 Dodge W100 (Front Inner) 1977-1993 Dodge W150 (Front Inner) 1975-1980 Dodge W200 (Front Inner) 1981-1993 Dodge W250 (Front Inner) 1994-2002 Dodge Ram 2500 1994-2002 Dodge Ram 3500 2001-2007 Dodge Dakota 2001-2009 Dodge Durango (Front) 1975-1993 Dodge Ramcharger (Front Inner) 1957-1962 Jeep F4-134 (Front) 1958-1960 Jeep FA-134 (Front) 1956-1964 Jeep Utility Wagon (Front) 1956-1964 Jeep 6-226 (Front) 1962-1966 Jeep F-134 (Front) 1957-1960 Jeep F4 (Front) 1955 Jeep Willys (Front) 1971-1973 Jeep Commando (Front Inner) 1957-1966 Jeep FC150 (Front) 1957-1965 Jeep FC170 (Front) 1962-1969 Jeep Gladiator (Front) 1971-1973 Jeep J-100 (Front Inner) 1965-1973 Jeep J-2500 (Front, Front Inner) 1965-1973 Jeep J-2600 (Front, Front Inner) 1965-1970 Jeep J-2700 (Front) 1965-1968 Jeep J-2800 (Front) 1965-1970 Jeep J-3500 (Front) 1965-1970 Jeep J-3600 (Front) 1965-1970 Jeep J-3700 (Front) 1965-1971 Jeep J-3800 (Front) 1971 Jeep Jeepster (Front Inner) 1961-1962 Jeep Utility (Front) 1971-1983 Jeep CJ5 (Front Inner) 1972-1975 Jeep CJ6 (Front Inner) 1976-1986 Jeep CJ7 (Front Inner) 1974-2001 Jeep Cherokee (Front Inner) 1986-1992 Jeep Comanche (Front Inner) 1993-1998 Jeep Grand Cherokee (Front Inner) 1984-1993 Jeep Grand Wagoneer (Front Inner) 1974-1988 Jeep J10 (Front Inner) 1974-1988 Jeep J20 (Front Inner) 1981-1985 Jeep Scrambler (Front Inner) 1971-1990 Jeep Wagoneer (Front Inner) 1987-2006 Jeep Wrangler (Front Inner) 1956-1966 Jeep Truck (Front) 1962-1965 Jeep 6-230 (Front) 1963-1965 Jeep FC170HD (Front) 1963-1965 Jeep J-210 (Front) 1963-1965 Jeep J-220 (Front) 1963-1965 Jeep J-230 (Front) 1963-1965 Jeep J-300 (Front) 1963-1965 Jeep J-310 (Front) 1963-1965 Jeep J-320 (Front) 1963-1965 Jeep J-330 (Front) 1963-1965 Jeep J-200 (Front) 1970-1973 Jeep J-4500 (Front, Front Inner) 1970-1973 Jeep J-4600 (Front)...
Extended Product Description: National B-2110 Multi-Purpose Bearing
Product Description - Invoice: Ball Bearing
Marketing Description: Manufactured with premium materials, National(R) needle bearings are designed and engineered to meet OE specifications.
Short Product Description: Ball Bearing
Bore (Inch): 1.3125 IN
Bore (mm): 33.3380 MM
Housing Diameter Max (Inch): 1.6255 IN
Housing Diameter Max (MM): 41.2877 MM
Housing Diameter Min (Inch): 1.6245 IN
Housing Diameter Min (MM): 41.2623 MM
Outside Diameter (Inch): 1.6250 IN
Outside Diameter (mm): 41.2750 MM
Shaft Diameter Max (Inch): 1.3125 IN
Shaft Diameter Max (MM): 33.3375 MM
Shaft Diameter Min (Inch): 1.3120 IN
Shaft Diameter Min (MM): 33.3248 MM
Type: B
Width (Inch): 0.6250 IN
Width (mm): 15.8750 MM
CTO: DE
Emission Code: 4
Harmonized Tariff Code (Schedule B): 8482400000
Harmonized Tariff Code (HTS): 8482400000
Life Cycle Status Code: 2
Life Cycle Status Description: Available to Order
SDR Required Flag: N
PRC: NEW
Taxable: Y

The NATIONAL SEAL/BEARING Transfer Case Input Shaft Pilot Bearing contains no remanufactured components, and is designed to operate in either city or highway driving.

Year	Make	Model	Engine	Notes
1998	Dodge	Ram 3500	5.9L	[Transfer Case Input Shaft Pilot Bearing] 4WD; Quantity needed per vehicle: 1
1998	Dodge	Ram 3500	5.9L	[Transfer Case Input Shaft Pilot Bearing] 4WD; Quantity needed per vehicle: 1
1998	Dodge	Ram 3500	5.9L	[Transfer Case Input Shaft Pilot Bearing] 4WD; Quantity needed per vehicle: 1
1998	Dodge	Ram 3500	5.9L	[Transfer Case Input Shaft Pilot Bearing] 4WD; Quantity needed per vehicle: 1
1998	Dodge	Ram 3500	8.0L	[Transfer Case Input Shaft Pilot Bearing] 4WD; Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.

All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.

Transfer Case Input Shaft Pilot Bearing - National Seal/bearing - Multi-Purpose Bearing (Part Number: B-2110)

Price: $ 18.38

Availability: In Stock

Product Details

Technical Details

Specifications

Warranty Information

Can't find what you are looking for? Try searching by one of these methods below.