Your Vehicle: 1964 Ford P 100 Click here to choose a new vehicle
This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
NATIONAL SEAL/BEARING - Manual Trans Output Shaft Bearing - BCA 206-L

Manual Transmission Output Shaft Bearing - National Seal/bearing - Multi-Purpose Bearing (Part Number: 206-L)

  • Price:   $  50.78

  • Availability: In Stock

Fits your vehicle.

  • CTO: CN
  • Emission Code: 4
  • Harmonized Tariff Code (Schedule B): 8482105052
  • Harmonized Tariff Code (HTS): 8482105052
  • Life Cycle Status Code: 2
  • Life Cycle Status Description: Available to Order
  • SDR Required Flag: N
  • PRC: NEW
  • Taxable: Y
  • Bore (Inch): 1.181 IN
  • Bore (mm): 30.000 MM
  • Design: Single Row Radial
  • Inner Race Bore (Inch): 1.181 IN
  • Inner Race Bore (MM): 30.000 MM
  • Inner Race Radius (Inch): 0.040 IN
  • Inner Race Radius (MM): 1.020 MM
  • Inner Race Width (Inch): 0.630 IN
  • Inner Race Width (MM): 16.000 MM
  • Outer Race Outside Diameter (Inch): 2.441 IN
  • Outer Race Outside Diameter (MM): 62.000 MM
  • Outer Race Radius (Inch): 0.040 IN
  • Outer Race Radius (MM): 1.020 MM
  • Outer Race Width (Inch): 0.630 IN
  • Outer Race Width (MM): 16.000 MM
  • Outside Diameter (Inch): 2.441 IN
  • Outside Diameter (mm): 62.000 MM
  • Series: 200
  • Type: A-10
  • Width (Inch): 0.630 IN
  • Width (mm): 16.000 MM
  • Application Summary: 1966-1976 BMW 2002 1971-1976 BMW 3.0Si 1977-1979 BMW 320i 1979 BMW 528i 1975-1978 BMW 530i 1977-1978 BMW 630CSi 1978-1980 BMW 633CSi 1978-1980 BMW 733i 1971 BMW 2.8 Bavaria (Front) 1971 BMW 2000ti 1971-1972 BMW 2000tii 1968-1971 BMW 2002ti 1971-1974 BMW 2002tii 1968-1974 BMW 2800 (Front) 1968-1971 BMW 2800CS (Front) 1971-1974 BMW 3.0CS 1971-1974 BMW 3.0CSi 1971-1974 BMW 3.0S 1972-1974 BMW Bavaria 1971 BMW 3.0CSL 1971-1972 BMW 2000 1968-1971 BMW 2500 (Front) 1981-1987 Isuzu Pickup (Front Outer) 1984-1987 Isuzu Trooper (Front Outer) 1960-1971 Jeep M151 1957-1962 Jeep F4-134 1958-1960 Jeep FA-134 1956-1964 Jeep Utility Wagon 1956-1964 Jeep 6-226 1957-1966 Jeep F-134 1957-1960 Jeep F4 1961-1967 Jeep Universal 1961-1969 Jeep Universal Truck 1946-1958 Jeep Willys 1959-1966 Jeep CJ3 1966-1971 Jeep Commando 1961-1969 Jeep Dispatcher 1959-1966 Jeep DJ3 1965-1971 Jeep DJ5 1965-1968 Jeep DJ6 1957-1964 Jeep FC170 1962-1969 Jeep Gladiator 1963-1964 Jeep J-100 1966-1971 Jeep J-2500 1966-1971 Jeep J-2600 1966-1970 Jeep J-2700 1966-1967 Jeep J-2800 1966-1970 Jeep J-3500 1966-1970 Jeep J-3600 1966-1970 Jeep J-3700 1966-1970 Jeep J-3800 1966-1971 Jeep Jeepster 1961-1962 Jeep Utility 1959-1971 Jeep CJ5 1959-1971 Jeep CJ6 1993-2004 Jeep Grand Cherokee (Rear) 1993 Jeep Grand Wagoneer (Rear) 1963-1964 Jeep Wagoneer 1956-1966 Jeep Truck 1956 Jeep 475 1961-1964 Jeep FJ3A 1962-1965 Jeep 6-230 1963-1964 Jeep FC170HD 1963-1964 Jeep J-210 1963-1964 Jeep J-220 1963-1964 Jeep J-230 1963-1964 Jeep J-300 1963-1964 Jeep J-310 1963-1964 Jeep J-320 1963-1964 Jeep J-330 1963-1964 Jeep J-200 1966-1968 Jeep CJ5A 1966-1968 Jeep CJ6A 1970-1971 Jeep J-4500 1970-1971 Jeep J-4600 1970-1971 Jeep J-4700 1964 Jeep FJ3 1962-1964 Jeep Tornado 1946-1950 Willys 4-63 1951-1952 Willys 4-73 Sedan Delivery 1948-1950 Willys Station Sedan 1946-1953 Willys Station Wagon 1981-1987 Chevrolet Chevette 1979-1982 Chevrolet LUV (Front...
  • Extended Product Description: National 206-L Multi-Purpose Bearing
  • Product Description - Invoice: Ball Bearing
  • Marketing Description: Designed to meet or exceed OE quality, premium-quality bearings from National(R) are manufactured to exacting standards to deliver lasting performance and extended bearing life.
  • Short Product Description: Ball Bearing

Product Details

Manufacturer:
National Seal/bearing
Part Number:
206-L
Manufacturer Part Number:
206-L
Description:
Manual Transmission Output Shaft Bearing
Long Description:
Multi-Purpose Bearing
Part Type:
Manual Transmission Output Shaft Bearing
Category:
Transmission
Subcategory:
Bearings
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
0.45 lbs.
Height:
3.187"
Width:
0.875"
Length:
0.875"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1
Item GTIN:
724956068784

Specifications

CTO
CN
Emission Code
4
Harmonized Tariff Code (Schedule B)
8482105052
Harmonized Tariff Code (HTS)
8482105052
Life Cycle Status Code
2
Life Cycle Status Description
Available to Order
SDR Required Flag
N
PRC
NEW
Taxable
Y
Bore (Inch)
1.181 IN
Bore (mm)
30.000 MM
Design
Single Row Radial
Inner Race Bore (Inch)
1.181 IN
Inner Race Bore (MM)
30.000 MM
Inner Race Radius (Inch)
0.040 IN
Inner Race Radius (MM)
1.020 MM
Inner Race Width (Inch)
0.630 IN
Inner Race Width (MM)
16.000 MM
Outer Race Outside Diameter (Inch)
2.441 IN
Outer Race Outside Diameter (MM)
62.000 MM
Outer Race Radius (Inch)
0.040 IN
Outer Race Radius (MM)
1.020 MM
Outer Race Width (Inch)
0.630 IN
Outer Race Width (MM)
16.000 MM
Outside Diameter (Inch)
2.441 IN
Outside Diameter (mm)
62.000 MM
Series
200
Type
A-10
Width (Inch)
0.630 IN
Width (mm)
16.000 MM
Application Summary
1966-1976 BMW 2002 1971-1976 BMW 3.0Si 1977-1979 BMW 320i 1979 BMW 528i 1975-1978 BMW 530i 1977-1978 BMW 630CSi 1978-1980 BMW 633CSi 1978-1980 BMW 733i 1971 BMW 2.8 Bavaria (Front) 1971 BMW 2000ti 1971-1972 BMW 2000tii 1968-1971 BMW 2002ti 1971-1974 BMW 2002tii 1968-1974 BMW 2800 (Front) 1968-1971 BMW 2800CS (Front) 1971-1974 BMW 3.0CS 1971-1974 BMW 3.0CSi 1971-1974 BMW 3.0S 1972-1974 BMW Bavaria 1971 BMW 3.0CSL 1971-1972 BMW 2000 1968-1971 BMW 2500 (Front) 1981-1987 Isuzu Pickup (Front Outer) 1984-1987 Isuzu Trooper (Front Outer) 1960-1971 Jeep M151 1957-1962 Jeep F4-134 1958-1960 Jeep FA-134 1956-1964 Jeep Utility Wagon 1956-1964 Jeep 6-226 1957-1966 Jeep F-134 1957-1960 Jeep F4 1961-1967 Jeep Universal 1961-1969 Jeep Universal Truck 1946-1958 Jeep Willys 1959-1966 Jeep CJ3 1966-1971 Jeep Commando 1961-1969 Jeep Dispatcher 1959-1966 Jeep DJ3 1965-1971 Jeep DJ5 1965-1968 Jeep DJ6 1957-1964 Jeep FC170 1962-1969 Jeep Gladiator 1963-1964 Jeep J-100 1966-1971 Jeep J-2500 1966-1971 Jeep J-2600 1966-1970 Jeep J-2700 1966-1967 Jeep J-2800 1966-1970 Jeep J-3500 1966-1970 Jeep J-3600 1966-1970 Jeep J-3700 1966-1970 Jeep J-3800 1966-1971 Jeep Jeepster 1961-1962 Jeep Utility 1959-1971 Jeep CJ5 1959-1971 Jeep CJ6 1993-2004 Jeep Grand Cherokee (Rear) 1993 Jeep Grand Wagoneer (Rear) 1963-1964 Jeep Wagoneer 1956-1966 Jeep Truck 1956 Jeep 475 1961-1964 Jeep FJ3A 1962-1965 Jeep 6-230 1963-1964 Jeep FC170HD 1963-1964 Jeep J-210 1963-1964 Jeep J-220 1963-1964 Jeep J-230 1963-1964 Jeep J-300 1963-1964 Jeep J-310 1963-1964 Jeep J-320 1963-1964 Jeep J-330 1963-1964 Jeep J-200 1966-1968 Jeep CJ5A 1966-1968 Jeep CJ6A 1970-1971 Jeep J-4500 1970-1971 Jeep J-4600 1970-1971 Jeep J-4700 1964 Jeep FJ3 1962-1964 Jeep Tornado 1946-1950 Willys 4-63 1951-1952 Willys 4-73 Sedan Delivery 1948-1950 Willys Station Sedan 1946-1953 Willys Station Wagon 1981-1987 Chevrolet Chevette 1979-1982 Chevrolet LUV (Front...
Extended Product Description
National 206-L Multi-Purpose Bearing
Product Description - Invoice
Ball Bearing
Marketing Description
Designed to meet or exceed OE quality, premium-quality bearings from National(R) are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Short Product Description
Ball Bearing

The NATIONAL SEAL/BEARING Manual Transmission Output Shaft Bearing contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
1964FordP-1002.4L[Manual Trans Output Shaft Bearing] Trans: Manual Trans, 2.77, 3 Speed Trans, Ford; Quantity needed per vehicle: 1
1964FordP-1002.8L[Manual Trans Output Shaft Bearing] Trans: Manual Trans, 2.77, 3 Speed Trans, Ford; Quantity needed per vehicle: 1
1964FordP-1003.6L[Manual Trans Output Shaft Bearing] Trans: Manual Trans, 2.77, 3 Speed Trans, Ford; Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 
Can't find what you are looking for? Try searching by one of these methods below.