Your Vehicle: 2000 Ford CONTOUR Click here to choose a new vehicle
This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
PIONEER INC. - Clutch Alignment Tool - PIO TAT-5408

Clutch Alignment Tool - Pioneer Inc. - 727993596425 (Part Number: TAT-5408)

  • Price:   $  11.10

  • Availability: In Stock

Fits your vehicle.

  • Input Shaft Diameter: 0.578 IN
  • Spline Quantity: 23
  • APS: Ford Aerostar 1997-1988, Bronco II 1990-1988, Contour 2000-1995, Explorer 2001-1991, Probe 1992-1990, Ranger 2002-1988, Mazda 626 1991-1988, 929 1991-1988, B2300 1997-1994, B2500 1998, B2500 2000, B2600 1993-1990
  • APS: B3000 1998, B3000 2002-2001, B4000 1998-1994, B4000 2001-2000, MPV 1991-1989, MX-6 1992, Navajo 1994-1991, RX-7 1991-1986, RX-7 1994-1993, Mercury Cougar 2001-1999, Mystique 2000-1995, Merkur XR4Ti 1989-1985
  • APS: Mitsubishi Starion 1989-1988
  • Application Summary: Ford Aerostar 1997-1988, Bronco II 1990-1988, Contour 2000-1995, Explorer 2001-1991, Probe 1992-1990, Ranger 2002-1988, Mazda 626 1991-1988, 929 1991-1988, B2300 1997-1994, B2500 1998, B2500 2000, B2600 1993-1990, B3000 1998, B3000 2002-2001, B4000 1998-1994, B4000 2001-2000, MPV 1991-1989, MX-6 1992, Navajo 1994-1991, RX-7 1991-1986, RX-7 1994-1993, Mercury Cougar 2001-1999, Mystique 2000-1995, Merkur XR4Ti 1989-1985, Mitsubishi Starion 1989-1988
  • Life Cycle Status Code: 2
  • Life Cycle Status Description: Available to Order

Product Details

Manufacturer:
Pioneer Inc.
Part Number:
TAT-5408
Manufacturer Part Number:
TAT-5408
Description:
Clutch Alignment Tool
Long Description:
727993596425
Part Type:
Clutch Alignment Tool
Category:
Vehicles Equipment Tools And Supplies
Subcategory:
Power Air And Hand Tools And Accessories
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
0.273 lbs.
Height:
3.024"
Width:
4.187"
Length:
4.187"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1

Specifications

Input Shaft Diameter
0.578 IN
Spline Quantity
23
APS
Ford Aerostar 1997-1988, Bronco II 1990-1988, Contour 2000-1995, Explorer 2001-1991, Probe 1992-1990, Ranger 2002-1988, Mazda 626 1991-1988, 929 1991-1988, B2300 1997-1994, B2500 1998, B2500 2000, B2600 1993-1990
APS
B3000 1998, B3000 2002-2001, B4000 1998-1994, B4000 2001-2000, MPV 1991-1989, MX-6 1992, Navajo 1994-1991, RX-7 1991-1986, RX-7 1994-1993, Mercury Cougar 2001-1999, Mystique 2000-1995, Merkur XR4Ti 1989-1985
APS
Mitsubishi Starion 1989-1988
Application Summary
Ford Aerostar 1997-1988, Bronco II 1990-1988, Contour 2000-1995, Explorer 2001-1991, Probe 1992-1990, Ranger 2002-1988, Mazda 626 1991-1988, 929 1991-1988, B2300 1997-1994, B2500 1998, B2500 2000, B2600 1993-1990, B3000 1998, B3000 2002-2001, B4000 1998-1994, B4000 2001-2000, MPV 1991-1989, MX-6 1992, Navajo 1994-1991, RX-7 1991-1986, RX-7 1994-1993, Mercury Cougar 2001-1999, Mystique 2000-1995, Merkur XR4Ti 1989-1985, Mitsubishi Starion 1989-1988
Life Cycle Status Code
2
Life Cycle Status Description
Available to Order

The PIONEER INC. Clutch Alignment Tool contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
2000FordContour2.0L[Clutch Alignment Tool] Quantity needed per vehicle: 1
2000FordContour2.0L[Clutch Alignment Tool] Quantity needed per vehicle: 1
2000FordContour2.5L[Clutch Alignment Tool] Quantity needed per vehicle: 1
2000FordContour2.5L[Clutch Alignment Tool] Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 


Can't find what you are looking for? Try searching by one of these methods below.