Your Vehicle:
2002 Ford RANGER Click here to choose a new vehicle
Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Manual Transmission Input Shaft Seal - National Seal/bearing - Multi-Purpose Seal (Part Number: 1990)
- CTO: MX
- Emission Code: 4
- Harmonized Tariff Code (Schedule B): 4016931020
- Harmonized Tariff Code (HTS): 4016931020
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDR Required Flag: N
- PRC: NEW
- Taxable: Y
- Helix Type: Clockwise-Spiral Lip Design
- Housing Bore: 43.000 MM
- Housing Bore: 1.693 IN
- Inside Diameter: 1.063 IN
- Inside Diameter: 27.000 MM
- Material: Polyacrylate
- Outside Diameter: 1.703 IN
- Outside Diameter: 43.250 MM
- Redicoat: Yes
- Sealing Material: Polyacrylate
- Series: 1000
- Shaft Diameter: 27.000 MM
- Shaft Diameter: 1.063 IN
- Thickness: 0.354 IN
- Thickness: 9.000 MM
- Type: 32
- Unit of Dimension: Metric
- Width: 9.000 MM
- Width: 0.354 IN
- Application Summary: 1995-2001 Kia Sephia (Outer) 2000-2004 Kia Spectra (Outer) 1981-1985 Isuzu I-Mark 1983-1989 Isuzu Impulse 1981-1987 Isuzu Pickup 1984-1987 Isuzu Trooper 1976-1979 Buick Opel 1972-1974 Chevrolet Luv Pickup 1981-1986 Chevrolet Chevette 1975-1982 Chevrolet LUV 1983-1984 Chevrolet S10 Blazer 1982-1987 Chevrolet S10 1983-1984 GMC S15 Jimmy 1982-1987 GMC S15 1981-1986 Pontiac Acadian 1982-1986 Pontiac T1000 2001 Ford Explorer Sport 2001-2003 Ford Explorer Sport Trac 2006-2012 Ford Fusion (Outer) 1986-1994 Ford Aerostar 1984-1990 Ford Bronco II 1972-1974 Ford Courier 1988 Ford E-150 Econoline 1988 Ford E-150 Econoline Club Wagon 2001-2012 Ford Escape (Outer) 1991-2003 Ford Escort (Outer) 1991-2001 Ford Explorer 1989-1997 Ford Probe (Outer) 1983-2011 Ford Ranger 2006-2011 Mercury Milan (Outer) 1991-1994 Mercury Capri (Outer) 1991-1996 Mercury Tracer (Outer) 1972-1977 Mazda 808 2001-2011 Mazda Tribute (Outer) 1993-1997 Mazda MX-6 (Outer) 2003-2009 Mazda 6 (Outer) 1972-1978 Mazda RX-3 1979-1985 Mazda RX-7 1988 Mazda 929 1976-1978 Mazda Cosmo 1991-1994 Mazda Navajo 1974-1978 Mazda RX-4 1970-1972 Mazda R100 2009-2013 Mazda 3 Sport (Outer) 1970-1972 Mazda 616 1972-1973 Mazda 618 1971-1974 Mazda RX-2 1979-2002 Mazda 626 (Outer) 1992-2003 Mazda Protege (Outer) 1977-1985 Mazda GLC 1976-1977 Mazda Mizer 1972-1976 Mazda B1600 1977-1978 Mazda B1800 1979-1984 Mazda B2000 2002-2003 Mazda Protege5 (Outer) 1982-1984 Mazda B2200 1994-2009 Mazda B2300 1998-2001 Mazda B2500 1974-1977 Mazda Rotary Pickup 1994-2008 Mazda B3000 1994-2009 Mazda B4000 2004-2013 Mazda 3 (Outer) 2006-2015 Mazda 5 (Outer) 1970-1972 Mazda 1200 1970-1971 Mazda 1800
- Extended Product Description: National 1990 Multi-Purpose Seal
- Product Description - Invoice: Felt Seal
- Marketing Description: National(R) has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today's vehicles.
- Short Product Description: Felt Seal
- Manufacturer:
- National Seal/bearing
- Part Number:
- 1990
- Manufacturer Part Number:
- 1990
- Description:
- Manual Transmission Input Shaft Seal
- Long Description:
- Multi-Purpose Seal
- Part Type:
- Manual Transmission Input Shaft Seal
- Category:
- Transmission
- Subcategory:
- Gaskets And Sealing Systems
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.042 lbs.
- Height:
- 2"
- Width:
- 0.625"
- Length:
- 0.625"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 724956062157
- Position:
- Outer
Technical Details
- CTO
- MX
- Emission Code
- 4
- Harmonized Tariff Code (Schedule B)
- 4016931020
- Harmonized Tariff Code (HTS)
- 4016931020
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- PRC
- NEW
- Taxable
- Y
- Helix Type
- Clockwise-Spiral Lip Design
- Housing Bore
- 43.000 MM
- Housing Bore
- 1.693 IN
- Inside Diameter
- 1.063 IN
- Inside Diameter
- 27.000 MM
- Material
- Polyacrylate
- Outside Diameter
- 1.703 IN
- Outside Diameter
- 43.250 MM
- Redicoat
- Yes
- Sealing Material
- Polyacrylate
- Series
- 1000
- Shaft Diameter
- 27.000 MM
- Shaft Diameter
- 1.063 IN
- Thickness
- 0.354 IN
- Thickness
- 9.000 MM
- Type
- 32
- Unit of Dimension
- Metric
- Width
- 9.000 MM
- Width
- 0.354 IN
- Application Summary
- 1995-2001 Kia Sephia (Outer) 2000-2004 Kia Spectra (Outer) 1981-1985 Isuzu I-Mark 1983-1989 Isuzu Impulse 1981-1987 Isuzu Pickup 1984-1987 Isuzu Trooper 1976-1979 Buick Opel 1972-1974 Chevrolet Luv Pickup 1981-1986 Chevrolet Chevette 1975-1982 Chevrolet LUV 1983-1984 Chevrolet S10 Blazer 1982-1987 Chevrolet S10 1983-1984 GMC S15 Jimmy 1982-1987 GMC S15 1981-1986 Pontiac Acadian 1982-1986 Pontiac T1000 2001 Ford Explorer Sport 2001-2003 Ford Explorer Sport Trac 2006-2012 Ford Fusion (Outer) 1986-1994 Ford Aerostar 1984-1990 Ford Bronco II 1972-1974 Ford Courier 1988 Ford E-150 Econoline 1988 Ford E-150 Econoline Club Wagon 2001-2012 Ford Escape (Outer) 1991-2003 Ford Escort (Outer) 1991-2001 Ford Explorer 1989-1997 Ford Probe (Outer) 1983-2011 Ford Ranger 2006-2011 Mercury Milan (Outer) 1991-1994 Mercury Capri (Outer) 1991-1996 Mercury Tracer (Outer) 1972-1977 Mazda 808 2001-2011 Mazda Tribute (Outer) 1993-1997 Mazda MX-6 (Outer) 2003-2009 Mazda 6 (Outer) 1972-1978 Mazda RX-3 1979-1985 Mazda RX-7 1988 Mazda 929 1976-1978 Mazda Cosmo 1991-1994 Mazda Navajo 1974-1978 Mazda RX-4 1970-1972 Mazda R100 2009-2013 Mazda 3 Sport (Outer) 1970-1972 Mazda 616 1972-1973 Mazda 618 1971-1974 Mazda RX-2 1979-2002 Mazda 626 (Outer) 1992-2003 Mazda Protege (Outer) 1977-1985 Mazda GLC 1976-1977 Mazda Mizer 1972-1976 Mazda B1600 1977-1978 Mazda B1800 1979-1984 Mazda B2000 2002-2003 Mazda Protege5 (Outer) 1982-1984 Mazda B2200 1994-2009 Mazda B2300 1998-2001 Mazda B2500 1974-1977 Mazda Rotary Pickup 1994-2008 Mazda B3000 1994-2009 Mazda B4000 2004-2013 Mazda 3 (Outer) 2006-2015 Mazda 5 (Outer) 1970-1972 Mazda 1200 1970-1971 Mazda 1800
- Extended Product Description
- National 1990 Multi-Purpose Seal
- Product Description - Invoice
- Felt Seal
- Marketing Description
- National(R) has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today's vehicles.
- Short Product Description
- Felt Seal
Specifications
The NATIONAL SEAL/BEARING Manual Transmission Input Shaft Seal contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2002 | Ford | Ranger | -L | [Manual Trans Input Shaft Seal] Trans: Manual Trans, 5 Speed Trans; Quantity needed per vehicle: 1 |
| 2002 | Ford | Ranger | -L | [Manual Trans Input Shaft Seal] Trans: Manual Trans, 5 Speed Trans; Quantity needed per vehicle: 1 |
| 2002 | Ford | Ranger | 2.3L | [Manual Trans Input Shaft Seal] Trans: Manual Trans, 5 Speed Trans; Quantity needed per vehicle: 1 |
| 2002 | Ford | Ranger | 3.0L | [Manual Trans Input Shaft Seal] Trans: Manual Trans, 5 Speed Trans; Quantity needed per vehicle: 1 |
| 2002 | Ford | Ranger | 3.0L | [Manual Trans Input Shaft Seal] Trans: Manual Trans, 5 Speed Trans; Quantity needed per vehicle: 1 |
| 2002 | Ford | Ranger | 4.0L | [Manual Trans Input Shaft Seal] Trans: Manual Trans, 5 Speed Trans; Quantity needed per vehicle: 1 |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|