Your Vehicle:
1997 Infiniti J30 Click here to choose a new vehicle
Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Suspension Ball Joint - Delphi - Ball Joint (Part Number: TC5070)
- AAIA Part Type Description: Ball Joint
- Label Description: Ball Joint
- Marketing Description: Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
- Short Product Description: Ball Joint
- CTO: CN
- Emission Code: 1
- Harmonized Tariff Code (Schedule B): 8708807000
- Harmonized Tariff Code (HTS): 8708806590
- Life Cycle Status Code: 4
- Life Cycle Status Description: Announced
- SDR Required Flag: N
- National Popularity Description: Last 5% of Product Group Sales Value
- NPS: D
- Maximum Cases per Pallet Layer: 1
- Pallet Layer Maximum: 1
- PRC: New
- Taxable: N
- Warranty Special: Limited Lifetime
- Warranty Special UOM: LF
- Adjustable: No
- Ball Joint Assembly: Yes
- Bushings Included: No
- Castle Nut Included: Yes
- Color: Black
- Cotter Pin Hole: Yes
- Cotter Pin Included: Yes
- Dust Boot Included: Yes
- Dust Boot Material: Choloroprene Rubber (CR)
- Grease Fitting Included: No
- Greaseable: No
- Height: 49.0 MM
- Height: 1.93 IN
- Item Grade: Standard Replacement
- Length: 152 MM
- Material: Steel
- Maximum Outside Diameter: 1.93 IN
- Maximum Outside Diameter: 49.0 MM
- Mounting Hardware Included: No
- Mounting Hole Quantity: 0
- Mounting Type: Press In
- Nuts Included: No
- Position(s): Front Left, Front Lower, Front Right. For the position specific to your vehicle, refer to the Applications.
- Stud Thread Diameter: 0.55 IN
- Stud Thread Diameter: 14.0 MM
- Stud Thread Length: 26.0 MM
- Stud Thread Length: 1.02 IN
- Stud Thread Pitch: 1.5 MM
- Stud Type: Threaded
- Suspension Grade Type: Standard
- Type: Threaded
- Washers Included: No
- Width: 49.0 MM
- Manufacturer:
- Delphi
- Part Number:
- TC5070
- Manufacturer Part Number:
- TC5070
- Description:
- Suspension Ball Joint
- Long Description:
- Ball Joint
- Part Type:
- Suspension Ball Joint
- Category:
- Suspension
- Subcategory:
- Suspension Springs And Related Components
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.95 lbs.
- Height:
- 4.5"
- Width:
- 2.9"
- Length:
- 2.9"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 2
- Minimum Order Qty:
- 1
- Item GTIN:
- 689604283615
- Position:
- Front Right
Technical Details
- AAIA Part Type Description
- Ball Joint
- Label Description
- Ball Joint
- Marketing Description
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
- Short Product Description
- Ball Joint
- CTO
- CN
- Emission Code
- 1
- Harmonized Tariff Code (Schedule B)
- 8708807000
- Harmonized Tariff Code (HTS)
- 8708806590
- Life Cycle Status Code
- 4
- Life Cycle Status Description
- Announced
- SDR Required Flag
- N
- National Popularity Description
- Last 5% of Product Group Sales Value
- NPS
- D
- Maximum Cases per Pallet Layer
- 1
- Pallet Layer Maximum
- 1
- PRC
- New
- Taxable
- N
- Warranty Special
- Limited Lifetime
- Warranty Special UOM
- LF
- Adjustable
- No
- Ball Joint Assembly
- Yes
- Bushings Included
- No
- Castle Nut Included
- Yes
- Color
- Black
- Cotter Pin Hole
- Yes
- Cotter Pin Included
- Yes
- Dust Boot Included
- Yes
- Dust Boot Material
- Choloroprene Rubber (CR)
- Grease Fitting Included
- No
- Greaseable
- No
- Height
- 49.0 MM
- Height
- 1.93 IN
- Item Grade
- Standard Replacement
- Length
- 152 MM
- Material
- Steel
- Maximum Outside Diameter
- 1.93 IN
- Maximum Outside Diameter
- 49.0 MM
- Mounting Hardware Included
- No
- Mounting Hole Quantity
- 0
- Mounting Type
- Press In
- Nuts Included
- No
- Position(s)
- Front Left, Front Lower, Front Right. For the position specific to your vehicle, refer to the Applications.
- Stud Thread Diameter
- 0.55 IN
- Stud Thread Diameter
- 14.0 MM
- Stud Thread Length
- 26.0 MM
- Stud Thread Length
- 1.02 IN
- Stud Thread Pitch
- 1.5 MM
- Stud Type
- Threaded
- Suspension Grade Type
- Standard
- Type
- Threaded
- Washers Included
- No
- Width
- 49.0 MM
Specifications
The DELPHI Suspension Ball Joint contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1997 | INFINITI | J30 | 3.0L | [Suspension Ball Joint] Front Right; Quantity needed per vehicle: 2 |
| 1997 | INFINITI | J30 | 3.0L | [Suspension Ball Joint] Front Left; Quantity needed per vehicle: 2 |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|