Your Vehicle: 1964 Jeep J 100 Click here to choose a new vehicle

This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

NATIONAL SEAL/BEARING - Transfer Case Output Shaft Repair Sleeve (Rear Rearward) - BCA 99156

Transfer Case Output Shaft Repair Sleeve - National Seal/bearing - Shaft Repair Sleeve (Part Number: 99156)

Manufacturer:: National Seal/bearing
Part Number:: 99156
Manufacturer Part Number:: 99156
Description:: Transfer Case Output Shaft Repair Sleeve
Long Description:: Shaft Repair Sleeve
Part Type:: Transfer Case Output Shaft Repair Sleeve
Category:: Transfer Case
Subcategory:: Hardware Fasteners And Fittings
Sales Rank:

Condition:: New
Product Fit:: Direct Fit
Weight:: 0.099 lbs.
Height:: 2.188"
Width:: 1.5"
Length:: 1.5"
UOM:: EA
Quantity Sold:: Sold individually
Qty Per Application:: 1
Minimum Order Qty:: 1
Item GTIN:: 724956213511
Position:: Rear Rearward

CTO: US
Emission Code: 4
Harmonized Tariff Code (Schedule B): 7307290090
Harmonized Tariff Code (HTS): 7307290090
Life Cycle Status Code: 2
Life Cycle Status Description: Available to Order
SDR Required Flag: N
PRC: NEW
Taxable: Y
Application Summary: 1957-1962 Jeep F4-134 (Front, Rear Rearward) 1958-1960 Jeep FA-134 (Rear Rearward, Front) 1956-1964 Jeep Utility Wagon (Front, Rear Rearward) 1956-1964 Jeep 6-226 (Rear Rearward, Front) 1957-1966 Jeep F-134 (Rear Rearward, Front) 1957-1960 Jeep F4 (Front, Rear Rearward) 1955 Jeep Willys (Rear Rearward, Front) 1966-1973 Jeep Commando (Rear Rearward, Front) 1962-1969 Jeep Gladiator (Front, Rear Rearward) 1963-1973 Jeep J-100 (Front, Rear Rearward) 1965-1973 Jeep J-2500 (Rear Rearward, Front) 1965-1973 Jeep J-2600 (Rear Rearward, Front) 1965-1970 Jeep J-2700 (Front, Rear Rearward) 1965-1968 Jeep J-2800 (Front, Rear Rearward) 1965-1970 Jeep J-3500 (Front, Rear Rearward) 1965-1970 Jeep J-3600 (Rear Rearward, Front) 1965-1970 Jeep J-3700 (Front, Rear Rearward) 1965-1971 Jeep J-3800 (Front, Rear Rearward) 1966-1971 Jeep Jeepster (Front, Rear Rearward) 1961-1962 Jeep Utility (Rear Rearward, Front) 1972-1979 Jeep CJ5 (Rear Rearward, Front) 1972-1975 Jeep CJ6 (Front, Rear Rearward) 1976-1979 Jeep CJ7 (Front, Rear Rearward) 1974-1979 Jeep Cherokee (Rear Rearward, Front, Rear) 1974-1979 Jeep J10 (Front, Rear Rearward) 1974-1979 Jeep J20 (Front, Rear Rearward) 1963-1979 Jeep Wagoneer (Rear Rearward, Front, Rear) 1956-1966 Jeep Truck (Rear Rearward, Front) 1961-1964 Jeep FJ3A (Rear Rearward, Front) 1962-1965 Jeep 6-230 (Front, Rear Rearward) 1963-1965 Jeep J-210 (Rear Rearward, Front) 1963-1965 Jeep J-220 (Rear Rearward, Front) 1963-1965 Jeep J-230 (Front, Rear Rearward) 1963-1965 Jeep J-300 (Front, Rear Rearward) 1963-1965 Jeep J-310 (Front, Rear Rearward) 1963-1965 Jeep J-320 (Rear Rearward, Front) 1963-1965 Jeep J-330 (Front, Rear Rearward) 1963-1965 Jeep J-200 (Front, Rear Rearward) 1970-1973 Jeep J-4500 (Front, Rear Rearward) 1970-1973 Jeep J-4600 (Rear Rearward, Front) 1970-1973 Jeep J-4700 (Rear Rearward, Front) 1971-1973 Jeep J-4800 (Rear Rearward, Front) 1964 Jeep FJ3 (Rear Rearward,...
Extended Product Description: National 99156 Shaft Repair Sleeve
Product Description - Invoice: Shaft Repair Sleeve
Marketing Description: National(R) has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today's vehicles.
Short Product Description: Shaft Repair Sleeve
Flange Diameter: 47.220 MM
Flange Diameter: 1.859 IN
Installation Depth: 1.000 IN
Installation Depth: 25.400 MM
Material: Stainless Steel
Overall Width (Inch): 0.688 IN
Overall Width (MM): 17.480 MM
Product Description: Repair Sleeve
Shaft Diameter: 1.562 IN
Shaft Diameter: 39.675 MM
Shaft Diameter Maximum: 1.565 IN
Shaft Diameter Maximum: 39.750 MM
Shaft Diameter Minimum: 1.559 IN
Shaft Diameter Minimum: 39.600 MM
Unit of Dimension: Inch
Width On Shaft: 14.300 MM
Width On Shaft: 0.563 IN

The NATIONAL SEAL/BEARING Transfer Case Output Shaft Repair Sleeve contains no remanufactured components, and is designed to operate in either city or highway driving.

Year	Make	Model	Engine	Notes
1964	Jeep	J-100	-L	[Transfer Case Output Shaft Repair Sleeve] Rear Rearward; Quantity needed per vehicle: 1
1964	Jeep	J-100	-L	[Transfer Case Output Shaft Repair Sleeve] Front; Quantity needed per vehicle: 1
1964	Jeep	J-100	3.8L	[Transfer Case Output Shaft Repair Sleeve] Front; Quantity needed per vehicle: 1
1964	Jeep	J-100	3.8L	[Transfer Case Output Shaft Repair Sleeve] Rear Rearward; Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.

All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.

Transfer Case Output Shaft Repair Sleeve - National Seal/bearing - Shaft Repair Sleeve (Part Number: 99156)

Price: $ 39.79

Availability: In Stock

Product Details

Technical Details

Specifications

Warranty Information

Can't find what you are looking for? Try searching by one of these methods below.