Your Vehicle:
2000 Lexus ES300 Click here to choose a new vehicle
Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Power Steering Pressure Hose - Crp/rein - Rein OE Quality Power Steering High Pressure Feed Hose Assembly (Part Number: PSH0385)
- Application Type: Application Specific
- Crush Washers Included: Yes
- End 1 Type: Banjo
- End 2 Gender: Female
- End 2 Thread Diameter MM: 15.0000
- End 2 Type: Inverted Flare
- Fitting Seals Included: No
- Functional Name: Transports P/S Fluid from P/S Pump
- Heat Shield Included: Yes
- Hose Burst Pressure PSI: 8700
- Hose Crimp End Finish: Zinc Alloy
- Hose Crimp End Material: Carbon Steel
- Hose Material: CSM
- Hose Operating Pressure PSI: 1700
- Item Grade: OEReplacement
- Link to Manufacturer Page: www.reinautomotive.com
- Mounting Brackets Included: Yes
- OE Tier: 1
- Package Contents: One Hose, One Pipe, Sleeve Protector, Heat Protector Sleeve, Two Brackets
- Power Steering Fitting Included: Yes
- Pressure Switch Port Included: Not Required
- Protective Shield Inc: Yes
- Protective Sleeve Included: Yes
- Tubing Finish: Zinc Alloy
- Tubing Material: Carbon Steel
- AAIA Part Type Description: Power Steering Pressure Hose
- Extended Product Description: Rein OE Quality Power Steering High Pressure Feed Hose Assembly, Exceeds SAE J188 / J526 Standards
- Product Description - Invoice: P/S High Pressure Feed Hose Assembly
- Marketing Description: Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.
- Short Product Description: P/S Press. Hose Assy
- CTO: US
- Harmonized Tariff Code (Schedule B): 4009320050
- Life Cycle Status Code: 2
- SDR Required Flag: N
- Warranty Distance: 24000
- Warranty Distance UOM: DH
- Warranty Time: 24
- Warranty Time UOM: MO
- Manufacturer:
- Crp/rein
- Part Number:
- PSH0385
- Manufacturer Part Number:
- PSH0385
- Description:
- Power Steering Pressure Hose
- Long Description:
- Rein OE Quality Power Steering High Pressure Feed Hose Assembly
- Part Type:
- Power Steering Pressure Hose
- Category:
- Steering
- Subcategory:
- Power Steering Hoses Pumps And Related Components
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 1.9 lbs.
- Height:
- 2"
- Width:
- 10"
- Length:
- 10"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 888544063190
- Position:
- Pump To Pipe
Technical Details
- Application Type
- Application Specific
- Crush Washers Included
- Yes
- End 1 Type
- Banjo
- End 2 Gender
- Female
- End 2 Thread Diameter MM
- 15.0000
- End 2 Type
- Inverted Flare
- Fitting Seals Included
- No
- Functional Name
- Transports P/S Fluid from P/S Pump
- Heat Shield Included
- Yes
- Hose Burst Pressure PSI
- 8700
- Hose Crimp End Finish
- Zinc Alloy
- Hose Crimp End Material
- Carbon Steel
- Hose Material
- CSM
- Hose Operating Pressure PSI
- 1700
- Item Grade
- OEReplacement
- Link to Manufacturer Page
- www.reinautomotive.com
- Mounting Brackets Included
- Yes
- OE Tier
- 1
- Package Contents
- One Hose, One Pipe, Sleeve Protector, Heat Protector Sleeve, Two Brackets
- Power Steering Fitting Included
- Yes
- Pressure Switch Port Included
- Not Required
- Protective Shield Inc
- Yes
- Protective Sleeve Included
- Yes
- Tubing Finish
- Zinc Alloy
- Tubing Material
- Carbon Steel
- AAIA Part Type Description
- Power Steering Pressure Hose
- Extended Product Description
- Rein OE Quality Power Steering High Pressure Feed Hose Assembly, Exceeds SAE J188 / J526 Standards
- Product Description - Invoice
- P/S High Pressure Feed Hose Assembly
- Marketing Description
- Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.
- Short Product Description
- P/S Press. Hose Assy
- CTO
- US
- Harmonized Tariff Code (Schedule B)
- 4009320050
- Life Cycle Status Code
- 2
- SDR Required Flag
- N
- Warranty Distance
- 24000
- Warranty Distance UOM
- DH
- Warranty Time
- 24
- Warranty Time UOM
- MO
Specifications
The CRP/REIN Power Steering Pressure Hose contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2000 | Lexus | ES300 | 3.0L | [Power Steering Pressure Hose] Pump To Pipe; Quantity needed per vehicle: 1 |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|