Your Vehicle: 1993 Nissan SENTRA Click here to choose a new vehicle

This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

NATIONAL SEAL/BEARING - Manual Trans Output Shaft Bearing - BCA 30304

Manual Transmission Output Shaft Bearing - National Seal/bearing - Multi-Purpose Bearing (Part Number: 30304)

Manufacturer:: National Seal/bearing
Part Number:: 30304
Manufacturer Part Number:: 30304
Description:: Manual Transmission Output Shaft Bearing
Long Description:: Multi-Purpose Bearing
Part Type:: Manual Transmission Output Shaft Bearing
Category:: Transmission
Subcategory:: Bearings
Sales Rank:

Condition:: New
Product Fit:: Direct Fit
Weight:: 0.39 lbs.
Height:: 2.062"
Width:: 0.875"
Length:: 0.875"
UOM:: EA
Quantity Sold:: Sold individually
Qty Per Application:: 2
Minimum Order Qty:: 1
Item GTIN:: 724956087587

CTO: ES
Emission Code: 4
Harmonized Tariff Code (Schedule B): 8482200040
Harmonized Tariff Code (HTS): 8482200040
Life Cycle Status Code: 2
Life Cycle Status Description: Available to Order
SDR Required Flag: N
PRC: NEW
Taxable: Y
Application Summary: 1948-1955 Porsche 356 (Front Outer) 1955-1959 Porsche 356A (Front Outer) 1960-1963 Porsche 356B (Front Outer) 1956-1963 Porsche Carrera (Front Outer) 1986-1989 Hyundai Excel (Rear, Outer) 1979-1991 Dodge Colt (Rear, Outer) 1988-1992 Eagle Vista (Rear, Outer) 1989 Eagle Summit (Outer) 1983-1991 Plymouth Colt (Outer, Rear) 1979-1982 Plymouth Champ (Outer, Rear) 1951-1954 Mercedes-Benz 300 (Front Outer) 1954-1955 Mercedes-Benz 300B (Front Outer) 1956-1957 Mercedes-Benz 300C (Front Outer) 1951-1955 Mercedes-Benz 300S (Front Outer) 1956-1957 Mercedes-Benz 300SC (Front Outer) 1958-1962 Mercedes-Benz 300D (Front Outer) 1954-1963 Mercedes-Benz 300SL (Front Outer) 1972-1974 Nissan 620 Pickup (Front Outer) 1965-1968 Nissan 520 Pickup (Front Outer) 1968-1972 Nissan 521 Pickup (Front Outer) 1975-1977 Nissan 620 (Front Outer) 1958-1959 Nissan 1000 1983 Nissan Pulsar 1983-1990 Nissan Pulsar NX 1982-1999 Nissan Sentra 1983-1988 Mitsubishi Cordia (Outer, Rear) 1983-1988 Mitsubishi Tredia (Outer, Rear) 1985-1989 Mitsubishi Mirage (Outer, Rear) 1987-1989 Mitsubishi Precis (Outer) 1956-1965 Volkswagen Karmann Ghia (Front Outer) 1950-1965 Volkswagen Beetle (Front Outer) 1965-1968 Toyota Stout (Front Outer) 1966 Toyota Pickup (Front Outer)
Extended Product Description: National 30304 Multi-Purpose Bearing
Product Description - Invoice: Ball Bearing
Marketing Description: Manufactured with premium materials, National(R) taper bearing assemblies are designed and engineered to meet OE specifications.
Short Product Description: Ball Bearing
Bore (Inch): 0.7874 IN
Bore (mm): 20.0000 MM
Cone Length (Inch): 0.5906 IN
Cone Length (MM): 15.0000 MM
Cone Radius (Inch): 0.0800 IN
Cone Radius (MM): 2.0320 MM
Cup Length (Inch): 0.5118 IN
Cup Length (MM): 13.0000 MM
Cup Radius (Inch): 0.0800 IN
Cup Radius (MM): 2.0320 MM
Design: ISO Metric
Outside Diameter (Inch): 2.0472 IN
Outside Diameter (mm): 52.0000 MM
Series: 30300
Standout (Inch): 0.1280 IN
Standout (MM): 3.2500 MM
Type: TS
Width (Inch): 0.6398 IN
Width (mm): 16.2500 MM

The NATIONAL SEAL/BEARING Manual Transmission Output Shaft Bearing contains no remanufactured components, and is designed to operate in either city or highway driving.

Year	Make	Model	Engine	Notes
1993	Nissan	Sentra	1.6L	[Manual Trans Output Shaft Bearing] Trans: Manual Trans, 5 Speed Trans; Quantity needed per vehicle: 2
1993	Nissan	Sentra	1.6L	[Manual Trans Output Shaft Bearing] Trans: Manual Trans, 5 Speed Trans; Quantity needed per vehicle: 2
1993	Nissan	Sentra	2.0L	[Manual Trans Output Shaft Bearing] Trans: Manual Trans, 5 Speed Trans; Quantity needed per vehicle: 2

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.

All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.

Manual Transmission Output Shaft Bearing - National Seal/bearing - Multi-Purpose Bearing (Part Number: 30304)

Price: $ 34.43

Availability: In Stock

Product Details

Technical Details

Specifications

Warranty Information

Can't find what you are looking for? Try searching by one of these methods below.