Your Vehicle: 1981 Toyota CRESSIDA Click here to choose a new vehicle
This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
GATES - Molded Heater Hose - GAT 18424

Engine Coolant Bypass Hose - Gates - Premium Molded Heater Hose (Part Number: 18424)

  • Price:   $  23.14

  • Availability: In Stock

Fits your vehicle.

  • CTO: US
  • Harmonized Tariff Code (Schedule B): 4009310000
  • Life Cycle Status Code: 4
  • SDR Required Flag: N
  • Taxable: Y
  • Abbreviated Product Description: Hose
  • Application Summary: 2006-04 Toyota, Sienna, V-6 3.3 L, Aux. Heater Pipe-2 To Aux. Heater Pipe-3
  • Product Description - Invoice: Molded Heater Hose
  • Marketing Description: Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
  • Short Product Description: Heater Hose
  • TLE: Premium Molded Heater Hose
  • Centerline Length: 312 MM
  • Centerline Length: 12.3 IN
  • End 1 Inside Diameter: .52 IN
  • End 1 Inside Diameter: 13 MM
  • End 2 Inside Diameter: .52 IN
  • End 2 Inside Diameter: 13 MM
  • Material: EPDM
  • Molded: Yes
  • Quick Connect Fitting Quantity: 0

Product Details

Manufacturer:
Gates
Part Number:
18424
Manufacturer Part Number:
18424
Description:
Engine Coolant Bypass Hose
Long Description:
Premium Molded Heater Hose
Part Type:
Engine Coolant Bypass Hose
Category:
Belts And Cooling
Subcategory:
Hoses And Pipes
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
0.2 lbs.
Height:
1.04"
Width:
3.69"
Length:
3.69"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1
Item GTIN:
072053191240

Specifications

CTO
US
Harmonized Tariff Code (Schedule B)
4009310000
Life Cycle Status Code
4
SDR Required Flag
N
Taxable
Y
Abbreviated Product Description
Hose
Application Summary
2006-04 Toyota, Sienna, V-6 3.3 L, Aux. Heater Pipe-2 To Aux. Heater Pipe-3
Product Description - Invoice
Molded Heater Hose
Marketing Description
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Short Product Description
Heater Hose
TLE
Premium Molded Heater Hose
Centerline Length
312 MM
Centerline Length
12.3 IN
End 1 Inside Diameter
.52 IN
End 1 Inside Diameter
13 MM
End 2 Inside Diameter
.52 IN
End 2 Inside Diameter
13 MM
Material
EPDM
Molded
Yes
Quick Connect Fitting Quantity
0

The GATES Engine Coolant Bypass Hose contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
1981ToyotaCressida2.8L[Molded Heater Hose] GAS; Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 


Can't find what you are looking for? Try searching by one of these methods below.