Your Vehicle:
2004 Toyota SIENNA Click here to choose a new vehicle
Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Power Steering Return Line Hose Assembly - Crp/rein - Rein OE Quality Power Steering Low Pressure Return Hose Assembly (Part Number: PSH0464)
- Application Type: Application Specific
- Clamps Included: Yes
- End 1 Inside Diameter MM: 10.0000
- End 1 Outside Diameter MM: 18.0000
- End 1 Type: Hose
- End 2 Inside Diameter MM: 10.0000
- End 2 Outside Diameter MM: 18.0000
- End 2 Type: Hose
- Fitting Seals Included: Not Required
- Functional Name: Transports P/S Fluid to P/S Pump
- Heat Shield Included: Not Required
- Hose Burst Pressure PSI: 750
- Hose Line Lining: SteelRubber
- Hose Line Outer Material: SteelRubber
- Hose Material: NBR/CR
- Hose Operating Pressure PSI: 250
- Item Grade: OEMStandard
- Link to Manufacturer Page: www.reinautomotive.com
- Mounting Brackets Included: Yes
- OE Tier: 1
- Package Contents: Two Hoses, One Pipe, Two Mounting Brackets, Two Clamps, Two Adjustable Clamps
- Power Steering Fitting Included: No
- Protective Shield Inc: No
- Protective Sleeve Included: Not Required
- Tubing Finish: PVF Resin
- Tubing Material: Carbon Steel
- AAIA Part Type Description: Power Steering Return Line Hose Assembly
- Extended Product Description: Rein OE Quality Power Steering Low Pressure Return Hose Assembly
- Product Description - Invoice: Power Steering Return Hose Assembly
- Marketing Description: Rein OE Quality power steering low pressure return hose assemblies are designed to save valuable labor time. During the manufacturing process, each low pressure return assembly undergoes testing of its low temperature flexibility and corrosion resistance to exceed industry standards. Rein low pressure hose assemblies are built with OE comparable rubber compound hose along with protective jacket(s) and or heat sleeve(s). The tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools and sealing hardware all as specified by the OE manufacturer.
- Short Product Description: P/S Return Hose Assy
- CTO: US
- Harmonized Tariff Code (Schedule B): 4009320050
- Life Cycle Status Code: 2
- SDR Required Flag: N
- Warranty Distance: 24000
- Warranty Distance UOM: DH
- Warranty Time: 24
- Warranty Time UOM: MO
- Manufacturer:
- Crp/rein
- Part Number:
- PSH0464
- Manufacturer Part Number:
- PSH0464
- Description:
- Power Steering Return Line Hose Assembly
- Long Description:
- Rein OE Quality Power Steering Low Pressure Return Hose Assembly
- Part Type:
- Power Steering Return Line Hose Assembly
- Category:
- Steering
- Subcategory:
- Power Steering Hoses Pumps And Related Components
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.56 lbs.
- Height:
- 6"
- Width:
- 11.25"
- Length:
- 11.25"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 888544073779
- Position:
- To Reservoir
Technical Details
- Application Type
- Application Specific
- Clamps Included
- Yes
- End 1 Inside Diameter MM
- 10.0000
- End 1 Outside Diameter MM
- 18.0000
- End 1 Type
- Hose
- End 2 Inside Diameter MM
- 10.0000
- End 2 Outside Diameter MM
- 18.0000
- End 2 Type
- Hose
- Fitting Seals Included
- Not Required
- Functional Name
- Transports P/S Fluid to P/S Pump
- Heat Shield Included
- Not Required
- Hose Burst Pressure PSI
- 750
- Hose Line Lining
- SteelRubber
- Hose Line Outer Material
- SteelRubber
- Hose Material
- NBR/CR
- Hose Operating Pressure PSI
- 250
- Item Grade
- OEMStandard
- Link to Manufacturer Page
- www.reinautomotive.com
- Mounting Brackets Included
- Yes
- OE Tier
- 1
- Package Contents
- Two Hoses, One Pipe, Two Mounting Brackets, Two Clamps, Two Adjustable Clamps
- Power Steering Fitting Included
- No
- Protective Shield Inc
- No
- Protective Sleeve Included
- Not Required
- Tubing Finish
- PVF Resin
- Tubing Material
- Carbon Steel
- AAIA Part Type Description
- Power Steering Return Line Hose Assembly
- Extended Product Description
- Rein OE Quality Power Steering Low Pressure Return Hose Assembly
- Product Description - Invoice
- Power Steering Return Hose Assembly
- Marketing Description
- Rein OE Quality power steering low pressure return hose assemblies are designed to save valuable labor time. During the manufacturing process, each low pressure return assembly undergoes testing of its low temperature flexibility and corrosion resistance to exceed industry standards. Rein low pressure hose assemblies are built with OE comparable rubber compound hose along with protective jacket(s) and or heat sleeve(s). The tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools and sealing hardware all as specified by the OE manufacturer.
- Short Product Description
- P/S Return Hose Assy
- CTO
- US
- Harmonized Tariff Code (Schedule B)
- 4009320050
- Life Cycle Status Code
- 2
- SDR Required Flag
- N
- Warranty Distance
- 24000
- Warranty Distance UOM
- DH
- Warranty Time
- 24
- Warranty Time UOM
- MO
Specifications
The CRP/REIN Power Steering Return Line Hose Assembly contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2004 | Toyota | Sienna | 3.3L | [Power Steering Return Line Hose Assembly] To Reservoir; Quantity needed per vehicle: 1 |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|