Your Vehicle: 2004 Toyota SIENNA Click here to choose a new vehicle

This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

NATIONAL SEAL/BEARING - Transfer Case Output Shaft Repair Sleeve (Rear) - BCA 99145

Transfer Case Output Shaft Repair Sleeve - National Seal/bearing - Shaft Repair Sleeve (Part Number: 99145)

Manufacturer:: National Seal/bearing
Part Number:: 99145
Manufacturer Part Number:: 99145
Description:: Transfer Case Output Shaft Repair Sleeve
Long Description:: Shaft Repair Sleeve
Part Type:: Transfer Case Output Shaft Repair Sleeve
Category:: Transfer Case
Subcategory:: Hardware Fasteners And Fittings
Sales Rank:

Condition:: New
Product Fit:: Direct Fit
Weight:: 0.079 lbs.
Height:: 2.188"
Width:: 1.5"
Length:: 1.5"
UOM:: EA
Quantity Sold:: Sold individually
Qty Per Application:: 1
Minimum Order Qty:: 1
Item GTIN:: 724956859306
Position:: Rear

CTO: US
Emission Code: 4
Harmonized Tariff Code (Schedule B): 7307290090
Harmonized Tariff Code (HTS): 7307290090
Life Cycle Status Code: 2
Life Cycle Status Description: Available to Order
SDR Required Flag: N
PRC: NEW
Taxable: Y
Application Summary: 2012-2017 Land Rover Range Rover Evoque (Front) 2015-2017 Land Rover Discovery Sport (Front) 2013-2015 Land Rover LR2 (Front) 2002-2019 Kia Optima (Front, Left, Right) 2012-2019 Kia Rio (Left) 2002-2005 Kia Sedona (Front) 1994-1997 Kia Sephia (Front) 2003-2018 Kia Sorento (Front, Left, Right) 2005-2018 Kia Sportage (Front, Right, Left) 2012-2018 Kia Forte5 (Left, Right) 2011-2016 Kia Forte Koup (Left, Right) 2004-2006 Kia Amanti (Front) 2002-2010 Kia Magentis (Front) 2007-2017 Kia Rondo (Front, Right, Left) 2012-2019 Kia Soul (Left, Right) 2011-2018 Kia Forte (Right, Left) 2013-2019 Hyundai Veloster (Right, Left) 1990-2019 Hyundai Sonata (Front, Left, Right) 2013-2014 Hyundai Elantra Coupe (Left, Right) 2013 Hyundai Santa Fe XL (Right, Left) 2013-2019 Hyundai Elantra GT (Left, Right) 2011-2019 Hyundai Elantra (Left, Right) 2012-2019 Hyundai Accent (Left) 2003-2008 Hyundai Tiburon (Front) 2005-2019 Hyundai Tucson (Front, Left, Right) 2001-2012 Hyundai Santa Fe (Front, Right, Left) 2018-2019 Hyundai Kona (Right, Left) 2013-2017 Hyundai Santa Fe Sport (Right, Left) 2001 Hyundai XG300 (Front) 2002-2005 Hyundai XG350 (Front) 1995-2000 Chrysler Cirrus (Front) 2000 Chrysler Grand Voyager (Front) 1990-1995 Chrysler LeBaron (Front) 1988-1989 Chrysler New Yorker (Front) 1995-2005 Chrysler Sebring (Front) 1990-1991 Chrysler TC Maserati (Front) 2000 Chrysler Voyager (Front) 1990-1993 Chrysler Daytona (Front) 1988-1990 Chrysler Dynasty (Front) 1995-2000 Dodge Avenger (Front) 1987-2000 Dodge Caravan (Front) 1992-1994 Dodge Colt (Front) 2013-2016 Dodge Dart (Right, Left) 1990-1993 Dodge Daytona (Front) 1988-1993 Dodge Dynasty (Front) 1987-2000 Dodge Grand Caravan (Front) 1987-1988 Dodge Mini Ram (Front) 1989 Dodge Raider (Front) 1990-1991 Dodge Ram 50 (Front) 1992-1994 Dodge Shadow (Front) 1989-1995 Dodge Spirit (Front) 1991-1996 Dodge Stealth (Front) 1995-2005 Dodge Stratus ...
Extended Product Description: National 99145 Shaft Repair Sleeve
Product Description - Invoice: Shaft Repair Sleeve
Marketing Description: National(R) has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today's vehicles.
Short Product Description: Shaft Repair Sleeve
Flange Diameter: 45.240 MM
Flange Diameter: 1.781 IN
Installation Depth: 20.620 MM
Installation Depth: 0.812 IN
Material: Stainless Steel
Overall Width (Inch): 0.500 IN
Overall Width (MM): 12.700 MM
Product Description: Repair Sleeve
Shaft Diameter: 1.457 IN
Shaft Diameter: 37.000 MM
Shaft Diameter Maximum: 37.080 MM
Shaft Diameter Maximum: 1.460 IN
Shaft Diameter Minimum: 1.453 IN
Shaft Diameter Minimum: 36.910 MM
Unit of Dimension: Inch
Width On Shaft: 9.530 MM
Width On Shaft: 0.375 IN

The NATIONAL SEAL/BEARING Transfer Case Output Shaft Repair Sleeve contains no remanufactured components, and is designed to operate in either city or highway driving.

Year	Make	Model	Engine	Notes
2004	Toyota	Sienna	3.3L	[Transfer Case Output Shaft Repair Sleeve] Front; AWD; Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.

All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.

Transfer Case Output Shaft Repair Sleeve - National Seal/bearing - Shaft Repair Sleeve (Part Number: 99145)

Price: $ 39.09

Availability: In Stock

Product Details

Technical Details

Specifications

Warranty Information

Can't find what you are looking for? Try searching by one of these methods below.