Your Vehicle:
2007 Toyota COROLLA Click here to choose a new vehicle
Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Power Steering Return Line Hose Assembly - Crp/rein - Rein OE Quality Power Steering Low Pressure Return Hose Assembly (Part Number: PSH0420)
- AAIA Part Type Description: Power Steering Return Line Hose Assembly
- Extended Product Description: Rein OE Quality Power Steering Low Pressure Return Hose Assembly
- Product Description - Invoice: Power Steering Return Hose Assembly
- Marketing Description: Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.
- Short Product Description: P/S Return Hose Assy
- CTO: US
- Harmonized Tariff Code (Schedule B): 4009320050
- Life Cycle Status Code: 2
- SDR Required Flag: N
- Warranty Distance: 24000
- Warranty Distance UOM: DH
- Warranty Time: 24
- Warranty Time UOM: MO
- Application Type: Application Specific
- Centerline Length Inches: 36.5000
- Centerline Length Metric: 92.7100000
- Clamps Included: Yes
- Color: Black
- End 1 Inside Diameter MM: 10.0000
- End 1 Outside Diameter MM: 18.0000
- End 1 Type: Hose
- End 2 Inside Diameter MM: 10.0000
- End 2 Outside Diameter MM: 18.0000
- End 2 Type: Hose
- Fitting Seals Included: Not Required
- Functional Name: Transports P/S Fluid to P/S Pump
- Heat Shield Included: Not Required
- Hose Burst Pressure PSI: 750
- Hose Line Lining: SBRRubber
- Hose Line Outer Material: Rubber
- Hose Material: NBR/CR
- Hose Operating Pressure PSI: 250
- Installation Hardware Included: Yes
- Installation Instructions Included: No
- Item Grade: OEMStandard
- Link to Manufacturer Page: www.reinautomotive.com
- Mounting Brackets Included: Yes
- OE Tier: 1
- Package Contents: Two Hoses, One Pipe, Two Mounting Brackets, Four Clamps
- Power Steering Fitting Included: No
- Protective Shield Inc: No
- Protective Sleeve Included: Not Required
- Tubing Finish: PVF Resin
- Tubing Material: Carbon Steel
- Manufacturer:
- Crp/rein
- Part Number:
- PSH0420
- Manufacturer Part Number:
- PSH0420
- Description:
- Power Steering Return Line Hose Assembly
- Long Description:
- Rein OE Quality Power Steering Low Pressure Return Hose Assembly
- Part Type:
- Power Steering Return Line Hose Assembly
- Category:
- Steering
- Subcategory:
- Power Steering Hoses Pumps And Related Components
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.6 lbs.
- Height:
- 2.75"
- Width:
- 9.5"
- Length:
- 9.5"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 888544069499
Technical Details
- AAIA Part Type Description
- Power Steering Return Line Hose Assembly
- Extended Product Description
- Rein OE Quality Power Steering Low Pressure Return Hose Assembly
- Product Description - Invoice
- Power Steering Return Hose Assembly
- Marketing Description
- Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.
- Short Product Description
- P/S Return Hose Assy
- CTO
- US
- Harmonized Tariff Code (Schedule B)
- 4009320050
- Life Cycle Status Code
- 2
- SDR Required Flag
- N
- Warranty Distance
- 24000
- Warranty Distance UOM
- DH
- Warranty Time
- 24
- Warranty Time UOM
- MO
- Application Type
- Application Specific
- Centerline Length Inches
- 36.5000
- Centerline Length Metric
- 92.7100000
- Clamps Included
- Yes
- Color
- Black
- End 1 Inside Diameter MM
- 10.0000
- End 1 Outside Diameter MM
- 18.0000
- End 1 Type
- Hose
- End 2 Inside Diameter MM
- 10.0000
- End 2 Outside Diameter MM
- 18.0000
- End 2 Type
- Hose
- Fitting Seals Included
- Not Required
- Functional Name
- Transports P/S Fluid to P/S Pump
- Heat Shield Included
- Not Required
- Hose Burst Pressure PSI
- 750
- Hose Line Lining
- SBRRubber
- Hose Line Outer Material
- Rubber
- Hose Material
- NBR/CR
- Hose Operating Pressure PSI
- 250
- Installation Hardware Included
- Yes
- Installation Instructions Included
- No
- Item Grade
- OEMStandard
- Link to Manufacturer Page
- www.reinautomotive.com
- Mounting Brackets Included
- Yes
- OE Tier
- 1
- Package Contents
- Two Hoses, One Pipe, Two Mounting Brackets, Four Clamps
- Power Steering Fitting Included
- No
- Protective Shield Inc
- No
- Protective Sleeve Included
- Not Required
- Tubing Finish
- PVF Resin
- Tubing Material
- Carbon Steel
Specifications
The CRP/REIN Power Steering Return Line Hose Assembly contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2007 | Toyota | Corolla | 1.8L | [Power Steering Return Line Hose Assembly] Quantity needed per vehicle: 1 |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|