Your Vehicle: 1988 Volkswagen GOLF Click here to choose a new vehicle
This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
TIMKEN - Wheel Bearing Retaining Ring (Front) - TIM RET130

Wheel Bearing Retaining Ring - Timken - Clip Used to Secure Unitized Bearing to Knuckle (Part Number: RET130)

  • Price:   $  4.88

  • Availability: In Stock

Fits your vehicle.

  • Quantity per Application: 2
  • Harmonized Tariff Code (Schedule B): 7318240000
  • Life Cycle Status Code: 4
  • NPS: C
  • Application Summary: FW-FWD VKS Car (1987-02).
  • Product Description - Invoice: Wheel Bearing Retaining Clip
  • Marketing Description: Provide a secure fit without scoring the inside of the bore
  • Marketing Description: Engineered to OEM specifications
  • Marketing Description: Provide ease of installation with a universal design that reduces notch configurations
  • Marketing Description: Aligned with stringent Timken quality standards
  • Marketing Description: Offer notches set for optimum access using traditional snap ring pliers
  • Marketing Description: www.timkeninfo.com
  • Short Product Description: RETAINING CLIP

Product Details

Manufacturer:
Timken
Part Number:
RET130
Manufacturer Part Number:
RET130
Description:
Wheel Bearing Retaining Ring
Long Description:
Clip Used to Secure Unitized Bearing to Knuckle
Part Type:
Wheel Bearing Retaining Ring
Category:
Driveline And Axles
Subcategory:
Hardware Fasteners And Fittings
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
0.03 lbs.
Height:
0.1"
Width:
4"
Length:
4"
UOM:
PC
Quantity Sold:
Sold individually
Qty Per Application:
2
Minimum Order Qty:
1
Item GTIN:
085706026455
Position:
Front

Specifications

Quantity per Application
2
Harmonized Tariff Code (Schedule B)
7318240000
Life Cycle Status Code
4
NPS
C
Application Summary
FW-FWD VKS Car (1987-02).
Product Description - Invoice
Wheel Bearing Retaining Clip
Marketing Description
Provide a secure fit without scoring the inside of the bore
Marketing Description
Engineered to OEM specifications
Marketing Description
Provide ease of installation with a universal design that reduces notch configurations
Marketing Description
Aligned with stringent Timken quality standards
Marketing Description
Offer notches set for optimum access using traditional snap ring pliers
Marketing Description
www.timkeninfo.com
Short Product Description
RETAINING CLIP

The TIMKEN Wheel Bearing Retaining Ring contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
1988VolkswagenGolf1.6L[Wheel Bearing Retaining Ring] Front; FWD; Quantity needed per vehicle: 2
1988VolkswagenGolf1.8L[Wheel Bearing Retaining Ring] Front; FWD; Quantity needed per vehicle: 2
1988VolkswagenGolf1.8L[Wheel Bearing Retaining Ring] Front; FWD; Quantity needed per vehicle: 2
1988VolkswagenGolf1.8L[Wheel Bearing Retaining Ring] Front; FWD; Quantity needed per vehicle: 2
1988VolkswagenGolf1.8L[Wheel Bearing Retaining Ring] Front; FWD; Quantity needed per vehicle: 2

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 1 Year Warranty from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 1 Year Warranty warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 


Can't find what you are looking for? Try searching by one of these methods below.